89 Civic Hatch with an LS B18A/B Swap?
 

what do i all need to get the swap done and is there anything that will cause problems...does the engine fit in the bay or i have to cut and fabricate ?















i know i need (not including Starter..etcs....















Engine, Tranny, ECU, Harnes, Motor Mounts, Axles,















please let me know if i need anything else that i'm missing.































please correct me if i'm wrong a b16 tranny should fit on a b18 right ? if so which tranny should i use ? thx

get on google and find a honda enthusiast forum. post this on there. you want to get good advice and gear heads will either tell you how and what or argue with each other till they agree on something. ive heard good things about ease of installing integra motors in civics but you need all the details.

remember that you can use a b16 tranny but it has to be a cable tranny unless you have the c/h conversion kit. I also suggest converting your car to obd1 and getting a chipped p28 or any obd1 ecu thats chipped with a b18a/b map. You mentioned most of the parts you need. As you are doing the project im pretty sure you're gunna stop and have to buy and extra thing or two. Also, im assuming you have a header for the engine....if not you need that as well