---

Interior:

Complete Carbon Fiber (door panels, rear speaker panel, front JDM S15 Seats and rear seats, headliner, new carpeting), Nardi JDM steering wheel, NR-G Carbon Fiber Steering Wheel Quick Release, Custom Carbon Fiber Center Console Assembly, JDM Gauge Cluster, New Dashboard (factory replacement), A/C Replacement Billet Gauge Panel , Boost Gauge – AEM Data Logger Gauge, Pyrometer – Autometer, Oil Pressure – AC Concepts, Greddy Shift Knob, B&M Short Shift Kit, Ny-Trex Intercooler Sprayer Kit, Turbo Timer – Greddy, Boost Controller – Greddy Profec B Spec S, Custom Carbon, Fiber 1 Piece Dash Board and Center Trim Panel, Silvia Floor Mats, 2 * 12” Kicker Competition Speakers mounted in custom fiberglass painted enclosure, Custom Carbon, Fiber Trunk Mat, Optima Battery – Red Top, Ny-Trex Black 10lb Nitrous Bottle, Custom Carbon Fiber Dashboard

Exterior:

JDM Folding Mirrors (Paint Matched with JDM Switch and custom Wiring), JDM, Skyline Front Grill, Optional Silvia JDM Grill, Optional Flying Sheep JDM Front Grill, Paint Matched, JDM Triple Projector s13 Front Headlight Assembly with JDM Corners, Replacement '05 Maxima HID Kit, JDM PIAA Yellow Replacement fog light bulbs, JDM Amber Front Bumper Lights, Hyper Plasma Amber Turn signal lights for corners and Bumpers, JDM Chargespeed Front Bumper, 30MM Front and Rear Fenders, Side Skirts, Rear Bumper, Fiberglass Charge Speed Hood, Fresh Fire pepper Red paint Job by Papa's Customs all body parts paint matched, All Trim Replaced or repainted Flat Black All External Engine and Lighting Wiring replaced or rewrapped and cleaned, R32 Rear Spoiler (custom fitment), Front and Rear 15% Tint including side mirrors, Speedzone Graphics Logo Package

Wheels & Suspension/Brakes:

Street Rollers – Volk Racing GT-V Custom wheels 18*9 12et black front wheels 18*11 10et rear wheels with 225-35-18 front Falken RT-615 Race Tires and 265-35-18 Rear Falken RT-615 Race Tires, Front and Rear Suspension (Current) - Tein HA Dampener, Nismo Front Power Brace, Tanabe Front and Rear Sway Bars, Tanabe Fender Brace Kit, Tein Hard Tie Rods, Tein Rear Strut Bar (Upper), Carbing Front Strut Bar (Upper), Rear Lower Kazama Strut Bar, Rear Lower Kazama Suspension Arms, Rear Upper Kazama Alignment Arms, Rear Upper Kazama Tension Rods, SPL Stainless Clutch Line, S13 Clutch Type Differential, Renova Auto Subframe Bushings, Front and Rear Rotora Master brake upgrade kit, Front 6 piston caliper kit with 14.5” rotor, Rear 4 piston caliper kit with 14” rotor, Rotora Flanged stainless brake lines front and rear, 300ZX Brake Booster and Master Cylinder (Remanufactured), Nismo Reservoir Covers

Engine/Transmission: (Special Thanks to PCC Racing Engines):

Custom Airbrushed Valve Cover, Custom Carbon Fiber Brake Heat Shield, Custom Carbon Fiber Battery Relocation Cover Plate, Red Top 91 SR20 DET Platform, Greddy Oil Pan, Custom Painted Black Block and Fixtures, Micro polished Stock Crank, Calico, Coated Main and Rod Bearings, Crower A-Spec Titanium Rods, CP Custom 88mm 9:1:1 pistons with rings/wristpins, Dart 90mm Steel Sleeve Kit .20 Over Line Bored/Decked and Coated Block, 68 Hours of Custom Port and Polishing on the head alone with port matching exhaust/intake side, Ferrea Valves 1mm oversized, double valve springs, Retainers, Valve Locks, Valve Guides (Beryllium), Calico Coated Valves intake/exhaust Head Complete internal coating, HKS 88mm 2.1mill Head gasket, JWT Stage 3 C2 275 Exhaust Cam, HKS Stage 3 274 Intake Cam, Greddy Intake and Exhaust Cam Gears, Greddy Intake Manifold (Calico Coated internal/external) with port work, Greddy/Trust 3.7” Catback exhaust system PE2, Gato Performance Custom Exhaust Manifold with internal and External Shroud work and Calico Coatings, GT35/40R Garrett Turbo with .82 Rear Side, Q45 90mm Throttle Body with R33 GTS-T TPS Sensor, Taka JDM Stainless Oil and Water Line Kit with all fittings upgraded using ARP and XRP parts, Samco hoses for all other engine coolant lines, Greddy Oil Block Adapter/Greddy Oil Relocation Kit, Steph's Oil Catch Tank with External Breather, All Main oil and Fuel lines upgraded with Stainless Lines and ARP Fittings, Power flow Fuel Filter Assembly (Modified OEM Fuel Rail With 6AN Fittings - polished), CHM Oil Filled Fuel Gauge Assembly with Adapter Fitting, 850 CC Sard Side Feed Injectors, Aeromotive Fuel Pressure Regulator 1000AN, (2) 255 Walbro In tank fuel pumps, New Factory Fuel Tank Greddy Upgrade 3" Cold pipe, Hose.Com Reducers for all IC Piping, Turbo Clamps for all pipes, Custom Hot pipe assembly with HKS SSQV BOV, Precision 900 4 Row Intercooler with 3" flared End tanks, Exedy Hyper single Clutch assembly balanced by PCC Automotive, Greddy Radiator polished aluminum, 2 * 12” Mr. Gasket Electric fans Cooling Tech Radiator Thermostat Kit, AEM EMS SYSTEM, AEM 5 bar Map System AEM AIT Sensor Kit, Mazworx 300ZX Transmission Adapter Plate, 300ZX TT Transmission, Mazworx 1 Piece Drive Shaft

---