Alpine Mrv-f407 Car Amp
4/3/2 Channel V12 Series Amplifier
Features General-Amplifiers No Current Limiting Gold Plated Insert Power Terminals 4/3/2 Channel Operation MOSFET Power Supply DC-DC PWM Power Supply Discrete Pre-Amp Stage MOSFET Final Outputs DC Straight Design STAR Circuitry Duo ? Feedback Circuit Solid Copper Bus Bars MultiMode Top Mounted Multi Status Indicator Independently Adjustable Crossover (HP/LP/BP) Top Panel Adjustment of Crossover and Gain Subsonic Filter Direct Mode Selector Switch Input Channel Selector Continuously Adjustable Gain Control Both sides Terminal Layout Gold Plated RCA Input Connectors Gold Plated Speaker Screw Terminals Direct Batt. Terminal Large-sized Fuse Noise Elimination Coil Non-Fading Pre-Amp Output Specifications MAX Power (at 14.4V,EIAJ) Per channel into 4 ohms- 120W x 4 Bridged 4 ohms- 320W x 2 RMS Power (at 12V,20Hz-20kHz) Per channel into 4 ohms- 40W x 4 (0.08% THD) Per channel into 2 ohms- 50W x 4 (0.3% THD) Bridged 4 ohms- 100W x 2 (0.3% THD) RMS Power (at 14.4V,20Hz-20kHz) Per channel into 4 ohms- 60W x 4 (0.08% THD) Per channel into 2 ohms- 80W x 4 (0.3% THD) Bridged 4 ohms- 160W x 2 (0.3% THD) Heat Sink (WxHxD)in- 13O x 10-1/4O x 2-3/8O Foot Print (WxHxD)in- 13O x 11O x 2-3/8O Slew Factor- greater than 5 Input Impedance- 10k ohm Speaker Impedance- 4 or 2 ohms(stereo), 4 ohms(bridged) Dividing Network- 50Hz-8kHz HP/LP/BP (12dB/oct) Power Requirements- 14.4V DC (11V to 16V) Heat Sink (WxHxD)mm- 330mm x 260mm x 60mm Foot Print (WxHxD)mm- 330mm x 280mm x 60mm Weight- 5.2kg(11lbs. 7oz.) Frequency Reponse- 10Hz-50kHz (+0,-1dB) Signal to Noise (S/N)- 105dBA (referenced to rated power) Input Sensitivity (for rated power)- 200mV ~ 4.0V this amp is in mint shape ,was in car for 2 weeks then had it removed $250.00 brampton area |
All times are GMT -4. The time now is 07:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands