Amp Problem
 

hey i recently found out my amp doesn't turn off after the deck
is turned off or removed...otherwise it works fine

its an alpine mrv 605...so the blue light remains on as i leave the car

any suggestions?

hey, check where your "turn-on" or remote wire is wired up to....u want it wired to a switched wire, preferably the remote wire on your deck's harness which usually is blue or blue/white...good luck

Who installed your amp? Some installers may connect the lead to the wrong wire, like ignition, for example. Camry92 has it right

i done it myself...i was told it would work on the blue wire....nothing

then i later tried the yellow and it worked fine.....until i recently noticed my
amp doesnt turn off along with the deck

Yeah thats your problem right there, you need to wire that remote wire to a wire that is not live after the car is turned off...the yellow wire on the harness is a constant 12V, and is live even if the key is removed...

If you have an aftermarket deck, im pretty sure it has a remote turn on lead on the harness...it should be blue or blue and another colour and may have a crimped connection already on the end of it...

ill check on that one

cause the blue wire that i tried (the first wire) wasn't crimped on anything
it was simply hanging out of the deck

thanks

There should be a blue with a white stripe, that will be your remote turn on wire.

if all else fails....jus run your remote wire on a switch to any 12v source... then u can turn on and off ur amp anytime u want

^thanks for the help guys
i tried the blue and white wire and it works like a charm

u probably got the remote turn on connected to the continuous power for the radio. u need to hook the remote turn on to the accessories wire.

definately check the remote wire....most likely the cause of your problem

lol look at the date of this post.
he fixed it in september of last year.

haha.:la:

no s**t eh? lolz

remote wire...

hahaha