arch inside...
 

i ordered a set of subs for my car for a start, well i told me dad i wanted punch 3's but this is what i got so do you know by any chance how they perform.. also what ohms should i bridge these 2 together on a xplod 1200w 2 channel amp
http://i6.ebayimg.com/02/i/04/63/80/f9_1_b.JPG
Thats the one im talkin about.

theres the subs...
http://cgi.ebay.com/ws/eBayISAPI.dll...MEWN%3AIT&rd=1

Im also going to run a capacitor i have and an external eq my uncle said he'll give me

Also this is the cd player im going to be running it on, until i get more money to put a lcd flip out ive been wanted
http://www.crutchfield.com/S-dAAhIl4...0&I=158CDXM881

them being 8 ohm bridge them together for a 4 ohm load, if you waited a few more days I will have those, and could get you 4 ohm ones. It is a low end sub (punch is the entry level)your not going to get a ton of spound from them (they are really inefficient)

yea i know i told my dad i wanted 12" 4 ohms to bridge down but he dont know jack about that kind of stuff but he ordered them without asking me so im stuck with them now, unltill i blow them out then ill move up to somethin better, we will see what happens i'll get everything to work out and pound, my uncle is a certified car audio technicial, (hes the one making my box for me) im sure i have a lot of ideads floatin trough my head, we wont know until the final project is done. I wish my digital camara was working and id take some pics of the setup in my bronco. you would understand then what kind of **** he did with that its crazy, its so clear and crisp with the vocals and you could hear it from a few blocks away

I wish I had any of the pics of my van

yes id like to see it also

i'd like to see pics of ANY of your audio set-ups, arch. They sound to be rather nice.

once I get a new one done I'll post it, right now the gp looks stock (I'm building new pods for the front speakers, and adding 8's in te stock rear location) teh truck has a bandpass box pretty much thrown in, most of my good jobs were prior to digital cameras and the boxes of pictures have been lost or destroyed

I wanna see some of these things you have done. I don't doubt your knowledge, but it's nice to see the equipment.

well I should have something for my doors in a couple weeks

shouldn't sound too bad at all. Those sony amps are actually pretty efficient at 4 ohms unlike most other amps. I believe they run 500 rms at 4 ohms bridged. Good luck.

the sony amps are no where near efficient unlike most amps 500 watts brided into 1 channel with outrageous distortion (pyramid actually has a better distortion rating)my lanzar opti 50 c was only rated at 50 watts rms, but when tested would actually put out 1500 watts with .05% distortion