Rep Power: 795

Ok this summer, my friends and myself are going to be building a all fiberglass Subwoofer Box, that holds two 12's...I have a Photshop version of what it will look like...i did all this in about an hour, cutting the cardboard and all that...but here it is...oh, and if you look at the picture...the Capacitor...i just snatched one off the internet but would the Capacitor be affected by how close it is to the subs...i know it has to be close to the amp as well, but would there be any interference...thats tilted back about 45 degrees...im going to test fit it in the Camaro in the morning, shave what i have to and see what i would have to add for the sides so i can hide the spare compartment in the back and to where you can see the plastic peice that the spare tire and jack reside behind...i dont want to see any of that...I want to do something special with the Camaro, but havent decided what color to do it in...so i just took the color of the Subs...but my plan was to have the words CAMARO light up when i hit a switch in the glovebox...im not sure if im going to do this yet or what, but im not sure if i will have them steady or with the bass..

 
Rep Power: 870

good luck with it, take your time and it will turn out real nice

 
Rep Power: 769

make sure the 12s you want to put in it you have enough air space i had to put alot more then just a drop compartment to met my air space requirments on my system

 
Rep Power: 769

but it looks sweet

 
Rep Power: 819

looks nice man. i hope it all turns out

 
Rep Power: 795

would the subs effect the capacitor...being that close to them...???

 
Rep Power: 769

i dont think so my compasator is right next to mine but ask arch he would know more then me.
my compasator is behind the 3 amps the silver part you see

 
Rep Power: 795

what size are those 15 or 18's...

what amps, subs, capacitor do you have...this has got to be loud...

 
Rep Power: 769

they are memphis mojo m3 12" subs with memphis amps 1100 continuous going to each twelve and a 4 channale going to the memphic componants custom fiberglass box with the 4 cubic feet of air space for each sup ported bult in to the box is a chevy emblem. A vodoo 5.0 firod compasator. Full dinomatting and seperat wires ran from my stinger battary for each amp. It is comp level bass like 150 db or over havnt got it read yet but im band from entry level comps.

 
Rep Power: 795

Wow...thats amazing...ok how much do you think a box would cost to be fiberglassed for just the trunk area...

 
Rep Power: 769

it they do the install and everything its hard saying my sestem is wort a **** load of money lol i would say ask arch he knows more about all this stuff then me

 
Rep Power: 1121

it varies greatly on what is needed, a basic custom enclosure at most shops starts at about $200 (materials run about $50) I have done enclosures that the final total was a couple grand (the one in my van cost about $1200 in materials)

 
Rep Power: 819

too much for me lol

 
Rep Power: 795

lol...how do you calculate a vented box air volume...

 
Rep Power: 795

if i got two of these...Clif Designs CD120W subs i have a Xplod 1000 wat amp that i might sell soon not sure, but would that amp power those subs...

Would This:


Power these:


is these any deals that i can get...