Installing A Tach
Thread Starter
~~ Hardcore Newb ~~
Joined: Apr 2005
Posts: 5
From: Brampton Ontario
Rep Power: 0 
Installing A Tach
hey guys.. ive got a autometer tach that my buddy gave me so i figured id slap it on my integra (its riced out enuff as it is). Its a 95 Integra..
its got red black green and white wires..
now i believe the red goes to a power for when the ignition is on, the black is a ground, the white goes to a fuse that has power when u turn ur cluster lights on and what not (i think) and the green has to go to a wire on my dizzy i assume???.. now which wire does it connect to on my dizzy
if ne one can give me a lil advice (and no, not advice as in.. DONT INSTALL IT CUZ ITS UGLY!.. LoL) id appreciate it. Thanks
email: squints_2@hotmail.com
or reply to this thread
Thanks
its got red black green and white wires..
now i believe the red goes to a power for when the ignition is on, the black is a ground, the white goes to a fuse that has power when u turn ur cluster lights on and what not (i think) and the green has to go to a wire on my dizzy i assume???.. now which wire does it connect to on my dizzy
if ne one can give me a lil advice (and no, not advice as in.. DONT INSTALL IT CUZ ITS UGLY!.. LoL) id appreciate it. Thanks
email: squints_2@hotmail.com
or reply to this thread
Thanks
on the driver's side shock tower harness there is a blue wire with a little plug (not plugged into anything) kinda just taped to the harness. Attach that green wire from the tack to this.
Thread
Thread Starter
Forum
Replies
Last Post
sTyLo
Honda Civic - Del Sol - CRX
0
Aug 27, 2008 10:10 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)