Bazooka Bass Tubes, Alpine Amp
Hey guys I got some car audio I'd like to sell... Located East GTA.. :biggrin:
Subwoofers and Amplifier 2 Bazooka Passive Bass Tubes w/ 200w rms subs $200>$180! -Subs are about 1.5 years old, still pound hard -Tubes are in great shape -These tubes also come with Bazooka UMS Mounting Brackets ($75 Value) -Pictures to come soon Specs: T102 Specifications Bass Tubes Enclosure Computer aligned bass reflex-ducted port. Woofer Size 10" Voice Coil Size 1.5" high power / high temp Magnet Size 28 oz. Frequency Response 39-1500Hz Efficiency 104dB* Power Handling 6 to 200 watts/channel T102 Dimensions 20.75" X 10.3" X 12.2" Weight 23 lbs. Impedance 4 ohms** PICTURE HERE!!! Alpine MRP-M200 300w/max Vpower Mono Block Amp $50 obo -Amp is in grood shape and pounds the Bazooka tubes. -Amp has salt stain on the bottom but it does not affect amp's performance -Pictures to come Specs: MAX Power (at 14.4V,EIAJ) Per channel into 2 ohms - 300W x 1 RMS Power (at 14.4V,20Hz-20kHz) Per channel into 4 ohms -150W x 1 (0.08% THD) Per channel into 2 ohms - 200W x 1 (0.3%) Bass Engine® Bass EQ (Variable) - 50Hz Variable (0 - +12dB) Crossover Network - Variable 50Hz - 200Hz LP (18dB/oct) General Frequency Reponse - 20Hz-200Hz (+0,-3dB) Signal to Noise (S/N) - 100dBA (referenced to rated power) Input Sensitivity (for rated power) - 200mV ~ 4.0V Slew Factor -greater than 5 Input Impedance - 10k ohm Speaker Impedance - 4 or 2 ohms(stereo), 4 ohms(bridged) Power Requirements - 14.4V DC (11V to 16V) Heat Sink (WxHxD) - 230mm x 58mm x 230mm Foot Sink (WxHxD) - 250mm x 58mm x 230mm Weight - 2.6kg(5lbs. 12oz.) PICTURE HERE! PM me or email djtakeda@rogers.com!! THANKS!!!! |
7" tftf lcd screen sold
7" tft lcd screen has been sold!
-Darren |
bump
bump!!!
|
Bump
Bump!!!!!!!!!!!!
|
Bump
BUMP
Make an OFFFERRR!! -Darren |
bump
bump :smilie_da
|
All times are GMT -4. The time now is 04:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands