GTcarz - Automotive forums for cars & trucks. - FS: Cadence Z4000 4 Channel AMP

For Sale $250 OBO, I paid just under $500

http://i5.photobucket.com/albums/y19...5/IMG_0006.jpg http://i5.photobucket.com/albums/y19...5/IMG_0001.jpg

SPECS
Cadence Z4000CF - Painted Carbon Fiber Finish

4 Channel Stereo Power Amplifier

Technische Daten:
- 4 Ohm Stereo Power 4 x 75 Watts
- 2 Ohm Stereo Power 4 x 150 Watts
- 4 Ohm Bridged Power 2 x 300 Watts
- Frequency Response 10Hz - 40KHz
- Signal/Noise Ratio >100dB
- Damping Factor > 200 @ 100 Hz
- Minimum THD <0.044%
- Channel Separation >65dB
- Input Voltage 150mV - 8 Volt
- Dimensions 15” x 10.75” x 2.4” (LxWxH)

Beschreibung:

MUTE & DELAY
A Mute and Delay circuit is standard in all models. Turn the amp on and the power slowly ramps up, with no pops. Turn the amp off and the music will slowly fade away without any annoying and damaging thumps. Crystal clear sound is what you will get when you turn on a Cadence amplifier.

RCA PREAMP OUTPUT
The State Variable Crossover enables you to combine multiple amplifiers for 2-way, 3-way and even band-pass systems. The Preamp outputs can be programmed to output the opposite signal that the amp is playing. So while the amp is in LP mode, the preamp out can be in HP or FR mode.

PARAMETRIC EQ
The fully adjustable Parametric Bass Equalizer allows you to choose the exact frequency that you want to boost. The boost is then adjustable from 0 to 16dB, thus allowing you to tailor your sound system to your particular tastes.

DIRECT CAPACITOR CONNECTION
Direct Connect stiffening capacitor terminals provide superior powersupply per for mance & in creased dynamic headroom. Now you can conveniently hook up your cap without the mess of any extra wire splicing!

FAN COOLING
It's no option; most models of Z amplifiers feature a built-in induction Fan Cooling System. This oversize fan keeps the operating temperature of the amp cooler longer so that you can enjoy more uninterrupted music.

HIGH PERFORMANCE TERMINALS
Heavy Duty, Gold Plated, power, ground, and remote terminals. The power and ground terminals can directly accept a 4 gauge wire. The gold plating assures loss-free power flow to the amplifier. The terminals are encapsulated in lucite to protect your system from shorts.

SUBSONIC FILTER
In addition to adjustable crossovers, each Z amplifier features a fully adjustable Subsonic Filter. By adjusting the frequency from 10Hz to 30Hz you can tune speaker enclosures to avoid the common problem of speakers unloading below the resonant frequency.

18dB CROSSOVER
Fully adjustable 18dB Low Pass Crossovers and 12dB High Pass Crossovers are built right into all the models. The sound Q of these crossovers practically negates the need for external crossovers in most systems.