GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   Car Care / Detailing / Paint / Visual Mods (https://www.gtcarz.com/car-care-detailing-paint-visual-mods-75/)
-   -   18" rim clearance (https://www.gtcarz.com/car-care-detailing-paint-visual-mods-75/18-rim-clearance-101878/)

MyFirstCamaro 03-27-2006 09:36 PM

18" rim clearance
 
Do 18" rims have any problem with clearance(wheel wells and turning), and tell me what you have too

V6Cam 03-27-2006 09:37 PM

Size i dont beleive so but width im not sure of...

MyFirstCamaro 03-27-2006 09:39 PM


Originally Posted by V6Cam
Size i dont beleive so but width im not sure of...

18x8.5? i think they should fit but i need some answers

97' Z28 show project 03-27-2006 09:47 PM

they fit over that your pushing it

MyFirstCamaro 03-27-2006 09:53 PM

so i dont have to worry with that size though right?

FORCE_FED_Z 03-27-2006 09:59 PM

You can tuck in 9.5" width with the correct offset all the way around and you can also get away with 11" in the rear if you do a little 'modifing'

But the 8.5" should fit no problem, assuming its the correct offset..

FamousZ 03-27-2006 10:05 PM

My front rims rub the front wheel well a TINY bit.. Mines 9"

MyFirstCamaro 03-27-2006 10:09 PM

they are 18x8.5 with an offset of 35 !

RFF 03-27-2006 10:31 PM


Originally Posted by FORCE_FED_Z
You can tuck in 9.5" width with the correct offset all the way around and you can also get away with 11" in the rear if you do a little 'modifing'

But the 8.5" should fit no problem, assuming its the correct offset..

What is the correct offset range?


All times are GMT -4. The time now is 09:01 PM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.04189 seconds with 5 queries