DIY gfx kit
 

alright well i am geting the xenon kit closer to the summer and i was wonder how you are supposed to attach the front and side peices, i already have the wholes drilled from the previous appearance kit that came with the car so i was wondering how they go on....and a price estimate to get the painted factory silver ................Derek you get the check yet ?

Nope I didnt get the check...

i snet it firday should come any day now

It may come today. But I work all day then have school, so I wont be able to go cash it or anything.. Ill keep you updated..

alright

Got it today..

most excellent..........now i need some help with this thread about the body kit is it easy to attach myself or is it better to ahve some1 do it cause i cant figure out howthe asides or front go on

With an Xenon kit, I believe that its all taped up.. I could be wrong, but from what I have seen the front is taped..

I think on the Xenon kit it's all one piece. The sides and rear are bolted on (I could be wrong on the rear as well). I've looked at it many a times and I can't find where the kit would end and the bumper would start :ne_nau:.

http://images.andale.com/f2/110/114/...6769_X5670.jpg
http://images.andale.com/f2/110/114/...825_X5630b.jpg

Rob

The sides and rear aren't too hard to do as long as you have a friend to help you. Just clean that part of the car from dirt and wax. Pull a little piece of the tape from each of the sides and gently press into the body. Then slowly pull the rest of the tape off and press it into the body. Then use the included screws on the inside to finish attaching it. The front is done the same if it's not a Xenon. If it is, then remove the whole front bumper and replace. I can't give details, since I haven't done this yet ;). But I have seen body kits put on and know whats involved.

Heres some more info on it at Wings West.

http://www.wingswest.com/techInfo.asp

Rob

http://nikon.250free.com/Camaro/old/219.jpg

http://nikon.250free.com/Camaro/old/219.jpg

http://nikon.250free.com/Camaro/old/223.jpg

There are some pictures of the Xenon kit not painted, showing how much of the front is actually the kit..

i like that kit...i thought it went on with double sided tape but i am not sure

I dunno, I'll have to see it in my hands to believe it.

Rob

I know the top part of it is taped.. And most likely the bottom will have some sort of bolt in it to hold it on..

alright thanks everyone for the help i didnt even know the xenon kit was that much of the body damn pss thanks for thoughs pics, im goig to see what i can get cheaper thoughs 2 peices liek the factory kit or the xenon , cause iahve the factory rear so i dont need thatt