Sleeved Block,B16Head,rods, pistons BOV, RACE!
 

Parting out my car!

I have a b16a3 head which was recently serviced 3000km ago with valve job, type r valve spring, and ported and polished. Comes complete with cams, Intake manifold, throttle body, MSD injectors, fuel rail.
$650

Golden eagle Wet sleeved b20 block with balanced crank, bearings and end caps installed. has under 3000km. Sleeves alone worth over $1500 installed.
$1500

Golden Eagle Rods with ARP rod bolts for b20/b18 under 3000km. Make an offer!

JE Low compression turbo pistons under 3000km currently attatched to the the eagle rods...make offer.

ARP B16 Head studs again under 3000km. $100

B20 Knife edged crank, balanced and rotated with under 3000km.

Turboxs Blow off valve perfect working order! $100

B series oil pan tapped for oil return from turbo $120.

Del sol Street fighter front bumper Hit a racoon :lol_hitti Need repair $25

3 1/2" Aluminum Radiator 1/2 length for del sol civic, or a integra with a turbo setup etc., works great, has very little use, still in my car if you want to insure no leaks etc. If you want to keep your car very cool this thing works amazing and also have B series size inlet/outlet. $200

MSD Digital 6 Ignition with 2 stage rev limiter with launch control and timing retard control. $200

Also have External coil and cap/rotor $200 obo

Pics of bumper prior to the racoon kill :)
http://memimage.cardomain.net/member...315_7_full.jpg

Also forgot to add the block is rated and good up to 60psi of boost. The sleeves have been installed by GOLDEN EAGLE and would cost close to $2000 AMERICAN to do all this to the block not including the price of the block. THIS IS A STEAL! All you b20/vtec owners get this before your sleeves crack!

Bump!! Lets get this stuff sold!

b16a3
 

i'll by the b16a3 for 400 email jasonfort49@hotmail.com

How much realistically do you want for the whole bottom end? does it have the little things, such as oil pan? pm me, or txt me 289 440 6613

Thanks

Realistically I want $1300 for just the block with regular b20 crank, etc. I just paid $1500 for it and havn't used it yet. You wont be able to buy/build a golden eagle sleeved block for any cheaper. And I am talking about sleeving alone. The block does however include oil pump, balanced crank installed with bearings. and the two end seals. Just trying to get back my money without losing too much and its very reasonable, if you know anything about building a motor it isnt an expensive price.

If you are looking to buy the rods, pistons etc, ARP rod bolts, ARP head studs, tapped oil pan, etc. let me know and ill work something out. And you will also have a choice of two cranks, (a stock one or knife edged)

Bumppp1111111111

Bumpp Make some offers

bumop11111