GTcarz - Automotive forums for cars & trucks.

AS IS. 22X,XXXkm, DX model
2nd owner, open to trade offers as well

Engine:
-MUGEN spec. p28 ecu
-JDM d15b VTEC
-No A/C, No PS, All new engine mount nuts/bolts from Honda
-Rebuilt 1.6 USDM vtec head with ARP studs/Cometic 1.8mm
-New Honda timing belt/water pump

Drivetrain:
-5spd tranny
-New EXEDY clutch
-New CV shafts
-Fidanza short shifter w/Energy Suspension bushings
-OMNI quik clutch M/C from optionJDM.com (reduces clutch pedal travel, bigger piston in M/C

Power adders:
-Very mint 14b turbo
-AEM rising rate adjustable FPR
-AEM adjustable cam gear
-Yonaka FMIC 8"x22"x3", welded removable slide brackets i made
-Yonaka triple core aluminum rad polished. welded mounts myself
-HKS SSQV B.O.V
-Mandrel bent charge pipes all 2.5"(made by me, mig welded)
vibrant silicone couplers x7
vibrant SS t-bolt clamps x12
-3x check valves for MAP sensor
-homemade mig welded SS log manifold:
vibrant SS head flange
vibrant SS 1.5" 45*deg bends and 2x 12" pipes
-Inline manual boost controller
-CISCO custom made stainless braided oil lines and fittings, all -AN sizing:
welded bung to oil pan for drain line
new gasket, cleaned out, gasket sealer
brass Tee on oil pressure switch for feed line
-Custom built 3" d/p with pie cuts to 2.5" mandrel bend catback and magnaflow muffler, high flow cat, 1 hanger snapped, and need a plug for the wideband bung i put on..

Electronics/Other:

-Hella Horn
-Omni power lowering sleeves, integra shocks (stiffer)
-Stewart Warner **ALL BLACK AND 52mm**:
Black Boost/Vac
Digital tach/blue multi-led shiftlight
Elec. Fuel Pressure 0-100psi
-NEWfront brake lines
-NEWrear brake cyl's,shoes, and rear steel brake lines
-EBC zinc plated dimpled/slotted rotors and EBC green pads
-NGK Iridium IX BKR7EIX plugs

*** recently added HKS SSQV blow off, Repainted intercooler pipes and engine bay high gloss black, 5 coats!!***

PICS
Attachment 167798

$3999 o.b.o