Air Fuel Ratio?
 

I got a gauge pod for the roof piller and a air fuel and voltmeter gauge ( that will be replaced with a trans temp later) the voltmeter I have no problem hooking up but the air fuel has got me I have a carb and no computer it says to hook it up between the computer and sensor I dont have a O2 sensor either I know I will have to get one of those but wil it work with out a computer?? and if so where should i hook it up at stright to the sensor or what?

well i dont know what kind of gauge you got, but you should be able to buy a sender just for that specific gauge and hook it right up.

you need an o2 sensor placement is also critical since too far back and it won't get hot enough to read acurate too close same idea

yeah i talked with my friend and he said to get a o2 sensor and the directions said to put it in right around the collecter so that is what i will do. thank for the help :)

I wouldn't buy an air/fuel guage without a wideband 02

well I got the guage from a friend for 40$ with pod and voltmeter so I though that was a pretty good deal. I know I dont need a voltmeter but it came with it so I have it until I replace it with a trans temp