GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   chevy / gmc (https://www.gtcarz.com/chevy-gmc-70/)
-   -   Bah! (https://www.gtcarz.com/chevy-gmc-70/bah-97305/)

SOMBirdV6 03-17-2005 07:30 PM

Bah!
 
Well I dunno what to do anymore, Ive tried so many differnt ways to fix my brakes and yet there still screaming at me! Every shop says differnt things. Pep Boys = Crappy Brakes, Midas = New Pads, Autozone = were ******* try cleaning them? Just Brakes = Try newq pads/rotas/etc...all of it. BAH! Im so annoyed with this......:(

archemedes 03-18-2005 08:31 PM

new pads should stop it (add the grese that you now have to buy seperate to them)I bet it has cheap pads on it, I use bosche or ac delco only (baer and those type I won't get into since they are a different realm) raybestos is the worst junk on the market many shops quit using them because of high failure and squeaks

RFF 03-18-2005 09:59 PM

Wagner would also be a good brand to try.

SOMBirdV6 03-18-2005 11:14 PM

Yeah, they are cheap pads so the sqweekin wont go away unless I change pads and since I just dished out over 600 for tires and exhaust I have to stick with those brakes for a while.

RFF 03-18-2005 11:40 PM


Originally Posted by SlvrV6Camaro
Yeah, they are cheap pads so the sqweekin wont go away unless I change pads and since I just dished out over 600 for tires and exhaust I have to stick with those brakes for a while.

Pads are not expensive. :confused:

archemedes 03-19-2005 01:45 PM

30 bucks a set or so

Camarocam 03-20-2005 11:07 PM

I got the advanced gold I think? and they don't sqweek but ever pad that I got at bumper to bumper for brake jobs that I did have sqweeked and I put the stuff on the rotors the stuff on the back of the pads that touch the clipers gresse on the spindle where the cliper rests and they still sqweeked but I just replaced the pads on my car I nothing else and they don't sqweek at all.

archemedes 03-21-2005 12:48 AM

any point the caliper touches anything else needs grease, same witht eh pins, but a good set of pads will make the most difference

McGruff 03-24-2005 10:27 PM

ceramics dont squeel...


All times are GMT -4. The time now is 04:49 PM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.05270 seconds with 5 queries