Carb Motor In A 96 Camaro
 

Im Building A 383 Stroker To Put In My 96 Camaro, It Was A V6. But Now There Is No Stock Suspension On It, Does Anybody Know Of This Being Done?? Any Ideas Or Things I Will Need 2 Know?? Let Me Know

get some mounts for the sbc, it will take a little fabbing but not too hard

i do know i have to use a lt1 NOt ls1 k member, what mounts should i get??? do you have a part number???

go to the junk yard and get some off any small block car you don't need to change the crossmember (maybe for trans depending what you decide there)

Some people on this site think you will get in big trouble for doing this :lolsign: .... But i think its all good... there is plenty of people running around with carburated motors in original f/i cars.... but i think it would be stout..... expecially if you put a shot of Nitrous on it :eleph:

all depends on if your gonna drive it on the street. if you are, then plan on gettin in trouble or never being legal.

do you have emissions testing if so gotta keep all factory type emissions controls including the fi

:grumble: :mad:

What kind of hood is that?

well someone had to ask :lolsign:

Looks like the Big Block "Stinger" or "Z-Roc" hood...

He no longer has that hood. I now have it. :) Its the big block but i dont know if its the stinger or zroc :confused:

yes, that's the names for it. it is the big block w/ the bulge running down the middle commonly called the z-roc or the stinger.

im not driving it on the street, it will be for racing, i also took the wing off and im putting a 4" cowl instead..i dont have emissions anyways

why not go with a f.a.s.t fuel injection dis system?