well yah sounds like u have rod knocking.. with that loud screeching sound... thats what mine sounded like when it was messing up...

bettin on bent exhaust valve

gas somehow got into the oil and it messed it up.

how much would it cost to make it a 383 with a pro installing it?

is this a good kit and do you think i will get good power out of it ?

Engine Rebuild, 4.060 in. Bore, Chevy, Small Block LT1, Kit

http://store.summitracing.com/defaul...ch&Ntt=rebuild


?

you may not need to go .060 over I would start with .030 from a relability standpoint, not that the bigger bore isn't reliable it's just the most you want to take a sbc engine without filling the block so anything happens (bad ring or something) it's junk

would it be worth it to get a 383 or a 396 . and how much would it cost with instaling it. or do u know a rebuild kit that will give me about 350/400 hp

would it be worth it to get a 383 or a 396 . and how much would it cost with instaling it. or do u know a rebuild kit that will give me about 350/400 hp

no specific kit will give you any power, it's all in combinations, and alot has to do with machine work, a basic kit may get you there if you do head work and upgrade the cam (few kits have the performance cam) 396 is a big block would be more work to install, 383 is a stroked 350 so it's the same engine

no specific kit will give you any power, it's all in combinations, and alot has to do with machine work, a basic kit may get you there if you do head work and upgrade the cam (few kits have the performance cam) 396 is a big block would be more work to install, 383 is a stroked 350 so it's the same engine

if you want to see my car look here

http://www.cardomain.com/member_page...5&val=1&page=1

if you want to see my car look here

http://www.cardomain.com/member_page...5&val=1&page=1

nice ryde man, signed ure guest book.

nice ryde man, signed ure guest book.

should i rebuild my motor or buy a new one?

should i rebuild my motor or buy a new one?