my video (with exhaust clips)
 

nothing too exciting, just showing off the car

here it is:

pacesetter headers
3 inch catco
3 inch spipe
2.75 i pipe
flowmaster 80

http://media.putfile.com/loochy

Sounds nice

It sounds good but out of curiousity why would you get a v6 not just go all the way and get the 8

ahh, the age old question.

long answer: bla bla bla bla...

short answer: money

regardless, when i finally get out of college (read: im still young) im going to be getting something with a couple extra cylinders (most likely an fbody... maybe a black or nbm SS circa 01 or 02)

what exhaust setup do you have? i love your car it is one of my favorite 6'ers

muchos gracias :)

its uncoated pacesetters
3 inch catco cat
3 inch spipe
2.75 inch ipipe
flowmaster 80 series

yeh, you have a good looking 6, What do you run with that nitrous set up??? How much of a shot you pushing? Thing sounded almost just like my 6, only yours sounds better. Keep up the good work.

50 jets are in right now. its an lt1 kit

i just noticed the video is cutting at about 1/3, thats odd

fixed

you should get a Z28 rear end

a 10 bolts a 10 bolt, if you mean he should get some steeper gears then say it

sounds like a "v6 is worthless type person here"


Sounds great man I like it.

sounds nice how much were the gauges i want some for mine. Like all the chrome under the hood

the z28 uses the same basic rear end as the v6 (just different gear ratio) it's also the same basic one as the s10

But the Z28 rear end also has the limited slip while the V6 has an open carrier. I put a rear end off a TA into my V6. It was cheaper than buying the differential by itself. Plus it had 3.73's installed so all the better.