Ported MAF
 

look i ported my MAF ends!!!

no actually i started to port my ends, but my compressor wont spin my die grinder enough. so i just went and bought some ported ones on ebay :)

Looks good...

j/c, but how often should the MAF sensor be cleaned?

I clean mine at least every 6 months, make sure and use a good cleaner that leaves no residue or it will kill the sensor

depends on how clean your motor runs..if its gettin miles on it you should clean it more often, I would say clean it as often as it gets dirty..

BRILLIANCE!!! :lolsign: :withsupid <--(we need a captain obvious smiley)

just messin with you man

well honestly i wouldnt think you'd need to. if you do though, use something like carb cleaner or throttle body cleaner, never brake cleaner.

I know, but sometimes simple questions need simple answers...

not all of us have our motors apart to know :nana:

Mine is my daily driver, so its not like I take apart my intake often enough to know.

touche-:p

On a more serious note, I would say check it every 6 months or so- maybe a little more often if you drive a lot- 2,000 a month or more...