rumbler
 

im getting ready to install my tsp rumbler. what do i need to do so. and does it need to be welded

You dont have to weld it, you could just use the clamps. I myself weld my exhaust up myself to make sure its not going anywhere. other than that your good to go.

welding ensures no leaks, but most people clamp exhaust

the rumbler is 3inches and the stock is like 2? how do they connect

converters. You should maybe look into this beforehand lol...

im not installing for a week or so...so this is beforehand. what is the stock pipe size? and i just go like to a kragens and ask for a exhaust pipe size converter or something

they have adapter pipes. they typically are with the exhaust stuff, and the counter people don't usually know what you need unless they have done it

Stock size is actually 1 3/4's, so have fun ;)

so 1 3/4th to 3 inch

don't think they make such a piece so you get to redneck engineer a few pieces together

that's a hell of a converter pipe i really don't think they got it

so how did other people put it on?

Weld two pipe adapters together.

or replace the whole exhaust.

why are you putting this on when your looking at getting an SS? seems like a waste to me