Need a bit of help with my CPU
ok guys i need help with my computer case you can take a look with this link
http://www.thermaltake.com/product/Chassis/midtower/armorjr/vc3000bws.asp ok i have everything running with it, i bought everything for it.. now all i need is a freaking FAN or something that lights up for the clearside case:confused: heres the question should i get a blue led fan for the side case? which i think is a 92mm but might be 90mm. BUT isnt that just for ventalation? the site even sais so, but i think i can fit a fan in there. or should i get some type of led light in my case? which to me seems like a the best idea. but i have no idea what to put in. someone help me decide:dunno: |
the answer is a fan adapter + dremel
most fans used in moden performance cases mainly those built by antex, thermaltake, or coolermaster are 80mm or 120mm a 90mm fan is rare at best. if you are an enthusiast chances are you have a small rotary tool lying around somewhere so heres my suggestion. materials dremel or variable speed drill w/ fine bits 120mm-80mm fan adapter 80mm fan dremel masking tape fine marker 4 X anodized aluminum screws instructions place the adapter over the fan opening on the case mark the screw holes w/ marker use masking tape over the holes (so plexi doesnt crack) mark the holes on the tape use rotary or drill with a fine 1/8 bit drill the screw holes place the adapter on the interior of the case and screw it in place and screw the fan onto the adapter hook fan to psu done! make sure you dont apply too much pressure on on the plexi glass because it easily breaks if done right you can use this method on the case if you want to make another fan hole. (you can get this materials from any pc store with the exception of a rotary or a drill home depot, rona, or somethin) |
Originally Posted by pur evil
the answer is a fan adapter + dremel
most fans used in moden performance cases mainly those built by antex, thermaltake, or coolermaster are 80mm or 120mm a 90mm fan is rare at best. if you are an enthusiast chances are you have a small rotary tool lying around somewhere so heres my suggestion. materials dremel or variable speed drill w/ fine bits 120mm-80mm fan adapter 80mm fan dremel masking tape fine marker 4 X anodized aluminum screws instructions place the adapter over the fan opening on the case mark the screw holes w/ marker use masking tape over the holes (so plexi doesnt crack) mark the holes on the tape use rotary or drill with a fine 1/8 bit drill the screw holes place the adapter on the interior of the case and screw it in place and screw the fan onto the adapter hook fan to psu done! make sure you dont apply too much pressure on on the plexi glass because it easily breaks if done right you can use this method on the case if you want to make another fan hole. (you can get this materials from any pc store with the exception of a rotary or a drill home depot, rona, or somethin) hmm i think ill do that.. ill just buy a 120mm a stick it in there drill the sucker in LOL |
ok.. well i found a store around me.. and had the 90mm.. so i just got one.. i also got the OCZ Tempest cpu cooler and a 12'' blue led cathode:thumbsup:
thanks anwayssssssss |
All times are GMT -4. The time now is 02:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands