fuel injector upgrade
 

:drive: what size fuel injectors should i upgrade to? I am currently pushing 560horsepower. I have a chip,2.81 pulley, x-pipe and cat back, throttle bodie, ngk plugs, heat exchanger, jlt cold air, and headers. Is this just a direct replacement with no other mods. I should have 39# injectors on my 2003 cobra. Is this enough. any help would be appreciated :sly:

You should step up to 50# injectors with a large MAF. You should already have a chip installed, have it reburned for the proper parts. If you dont have a chip installed, go see Paul @ Steeda.ca for a custom dyno tune. With 560 flywheel HP the stock Cobra injectors are likely near maxed out.
SS

Thamks. I have the diablo predator chip in and my jlt cold air intake is 12" long 4" round so that should be fine. My chip was programmed for the smaller pulley and intake so it wouldnt run lean. By the way will the injectors really give more power and torque

No, they will not add any power on their own. They open up the availability of more power due to the ability to add in more timing and/or boost.
SS

:wavey: :knock_tee thanks alot. I am currently hitting 15 p.s.i. and my chip has advanced timing in it so I should be o.k. right? where are you from and whats your ride. My mustang club is doing a run on may 20 to Orange County Choppers. Should be f---in awesome. Also what size gap should i be runnung with the ngk plugs. :dunno:

Cool, as long as you dont hear any detonation you should be fine. You should be running a .028-.032" gap in your plugs. My ride is a single turbo 85 GT.
SS