Review of 1991 Mustang LX
Car: 1991 Mustang LX
Part: BBK Long tube headers and Offroad H-pipe Pro's: Great headers, made the car sound like a beast and the power increase was substantial. Con's: It was a little time consuming to install those headers but worth it in the end. Part: Autogage 5" tach w/shift light Pro's: Great tach for a great price, install was a sinch. Con's: None. Part: Mega-Bite Jr. lower control arms Pro's: Best control arm on the market, dual settings are available with it. Makes the car launch like a rocket. Con's: Kinda hard to install, requires a 100ft-lbs minimum impact socket gun (to loosen the stock bolts) which I did not have :) You'll need multiple jackstands and a really big hammer for these puppies. Part: Granatelli Double adjustable upper control arms Pro's: Made the rearend MUCH more responsive, then again they were installed with the mega-bites. The combination is outstanding though. Con's: None, install was rather easy. Part: Kirban Adjustable fuel pressure regulator and gauge Pro's: Fine tuning of the fuel pressure made easy. Con's: None. Part: Adjustable Pinion snubber Pro's: Very easy to install, takes 5 minutes and helps control the pinion angle. Con's: When mine is in race position it makes the ride a little bumpy. Part: GT40E Intake Manifold Pro's: Great manifold, a lot of power can be freed up with one of these. This manifold in particular can flow boost very well too. Con's: Since mine came off of an explorer, some of the EGR and sensor bungholes are not there. I don't care about EGR or the sensors but some people do, this can be problematic. Part: C&L 73mm MAF Pro's: Freed up lots of power, install was a breeze. Con's: C&L MAF's tend to be tempermental and don't like air turbulence. Part: BBK 70mm Throttle Body and EGR spacer Pro's: Freed up some more power. Con's: None. Part: Lakewood 50/50 Drag shocks Pro's: Helps with launching and weight transfer, very noticeable. Con's: Shocks still seem a little to stiff, maybe it's just me. Part: PTP 3.73:1 Rear Gears and Richmond master rearend rebuild kit Pro's: GEARS RULE! Con's: I didn't install them so I wouldn't know. Part: Summit brand harmonic balancer Pro's: Cheap and easy to install with the puller. Reduces vibrations by a whole lot. Con's: Starting to rust so I'm thinking of painting it. Can't re-use stock bolts if you have underdrive pulleys. You'll need to search for the right length bolts. Part: Prothane engine mounts Pro's: Great mounts, makes the torque transfer to the wheels much more responsive and reduces vibrations. Con's: Loosening the motor mount bolts was hard without the impact wrench. Part: Energy Suspension Transmission mount Pro's: Reduces vibration. Con's: To install requires some filing of the tranny crossmember. Part: MSD 6AL Ignition box Pro's: Helps gas mileage and idle. Con's: You don't feel this mod in the seat of your pants, it's one of those mods that does help all around though. Part: Autospecialties Underdrive pulley set Pro's: Easy to install and instant power gains. Con's: You might have a problem charging your battery if you have a big sound system with a stock alternator. |
Awesome, this is great information! :wiggle:
|
All times are GMT -4. The time now is 12:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands