Drum to Disk swap for V6s
Thread Starter
~~ Hardcore Newb ~~
Joined: Mar 2005
Posts: 127
From: St Louis
Rep Power: 770 
Skilled GTcars Poster
Joined: Oct 2004
Posts: 701
From: Alabama
Rep Power: 799
haha good job.. about what i did.. cept it took alot more for me..
all in all i did
DIsc Brakes
Z-28 Sway Bar
Z-28 Stage 2 Shocks
Limited SLip Differential
3.42 Gears
3 to 4 channel ABS swap
and a few other goodies
all in all i did
DIsc Brakes
Z-28 Sway Bar
Z-28 Stage 2 Shocks
Limited SLip Differential
3.42 Gears
3 to 4 channel ABS swap
and a few other goodies
Junior GTcars Poster
Joined: May 2005
Posts: 389
From: MIlwaukee
Rep Power: 769
im doing that swap... prolly next week... but im just sticking the while rearend from a 96 trans am under my car.... so i dont think ill have to go through all the little crap...... thank
~~~ SITE SPONSOR ~~~
Joined: Apr 2003
Posts: 2,101
From: Grand Ol' WNY
Rep Power: 881
Talk about a ressurection from the dead post Danielle-
I would say you should be able to do it for under $200- Check the bay for the calipers and such. Junkyard for the caliper bracket and perhaps the zone for the cables.
Its kinda time consuming, but not hard.
I would say you should be able to do it for under $200- Check the bay for the calipers and such. Junkyard for the caliper bracket and perhaps the zone for the cables.
Its kinda time consuming, but not hard.
Post Wench
Joined: Jun 2003
Posts: 10,392
From: Nemacolin, PA
Rep Power: 1041
Originally Posted by FORCE_FED_Z
Talk about a ressurection from the dead post Danielle-
I would say you should be able to do it for under $200- Check the bay for the calipers and such. Junkyard for the caliper bracket and perhaps the zone for the cables.
Its kinda time consuming, but not hard.
I would say you should be able to do it for under $200- Check the bay for the calipers and such. Junkyard for the caliper bracket and perhaps the zone for the cables.
Its kinda time consuming, but not hard.
This is going to be one of my xmas presents, most likely. Lucky Ryan.
