b-series???????
 

Hey guys
I have a b18a (90-93) teg motor and i'm lookin for a tranny.....now i'm allmost positive that any b-series tranny will mount up(correct me if i'm wrong) i would like some feedback from guys who would know
thanks
brandon

nope if the motor is in a 90-93 teg... then you need a cable b-series tranny... all b series new than 94 are hydrolic.. but the gen 2 tegs are a cable tranny...

^^^you can use any b series tranny all u gotta get is the conversion kit...but then again it will be chapper just to get the cable tranny wich is really hard to find....

ya i wasnt sure about the conversion kit and was to lazy to check.... i know there is a cable to hydrolic... but wasnt sure about hydrolic to cable

ok but i have a 95 cx civic which is hydro with a 90 teg motor going in ....so i should be able to put a 94-01 hydro teg tranny on right????

thanks guys

yep hydrolic

Yes ALL b-series are interchangeable, you only have to worry about wether it is cable or hydraulic.

AWESOME ......appriciate the help guys
brandon

Thats true, to an extent.
All b-series hydro trannys use the larger spline (26 teeth) main shaft while MOST but not all cable tranny's use a small spiline (24 teeth) main shaft.
So what this means is that you can't use a hydro clutch disk on a cable tranny because it will be too large to fit the smaller splined main shaft of the cable tranny, this also is true about using a cable tranny clutch disk on a hydro tranny it won't fit because the hydro tranny's main shaft splines are too large.
But you can use any b-series tranny (cable or hydro) on any b-series engine as long as you have the right clutch disk.

Get a cable b16 tranny and you will love it