you need a 1st gen b16 distributor. Can't really order it from a store though. A 90-91 integra dizzy will work but you will have to cut one of the arms so it fits and only 1 bolt will hold it in place, but i've seen that work just fine on more than a few cars. Check a jap importer or the classifieds if you need one.
You can also use any b-series VTEC dizzy but it will require cutting off the plugs and for you to solder/shrinkwrap the wires together. I am using a obd2 (96-00) gsr integra dizzy on my 2nd gen b16 obd1 engine. Its pretty simple, most of the wire's colors match up too.
|
