GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   honda / acura (https://www.gtcarz.com/honda-acura-66/)
-   -   Civic 1993 need help (https://www.gtcarz.com/honda-acura-66/civic-1993-need-help-21234/)

essence 02-25-2006 07:56 PM

Civic 1993 need help
 
Alright my civic when i push the clutch its really soft rite and i put it in 2 1st and i let the clutch so and rev it the car moves really really slow is my clutch gone or what? but its hard 2 shift in to gear some times

Honda Tech 02-25-2006 09:53 PM

hey man, so it could be clutch but also may be the throw bearing is sticking on the input shaft, but clutches are hard to diagnose without personally checking them.

civtegra90 02-26-2006 10:34 AM

did this happen over time or right at once?

essence 02-26-2006 01:15 PM

Right at once

Honda Tech 02-26-2006 01:52 PM

k, then isn't thro bearing then.

essence 02-26-2006 01:57 PM

my buddy was saying i should bleed the clutch ?

essence 02-26-2006 03:15 PM

i can rev the car really high and it will move but it wont stall if i let go of the clutch it will just keep running

civtegra90 02-26-2006 05:28 PM

bleeding the clutch wont do with those symptoms, that would be the complete opposite of your problem

Tmack95 03-13-2006 11:24 PM

Hey, have you ever lost a clutch before? There is a distinct smell you're clutch will make. You will smell it as soon as you turn off you're car and get out. It smells like burnt plastic kind of.

Honda Tech 03-14-2006 07:37 AM


Originally Posted by Tmack95
Hey, have you ever lost a clutch before? There is a distinct smell you're clutch will make. You will smell it as soon as you turn off you're car and get out. It smells like burnt plastic kind of.

Dude this thread is old, and he already replaced his clutch.


All times are GMT -4. The time now is 06:32 AM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.06200 seconds with 5 queries