D series boost build
 

Hey guys i need some help...

I just ordered:
D16z6 Aries Pistons 8:1 compression
Eagle Rods
Cometic Head Gasket
ARP head bolts


is there a link to installing the pistons and rods into the block?? ive been searching and cant find anything useful

Hey guys i need some help...

I just ordered:
D16z6 Aries Pistons 8:1 compression
Eagle Rods
Cometic Head Gasket
ARP head bolts


is there a link to installing the pistons and rods into the block?? ive been searching and cant find anything useful

take out old ones and install new ones...LOL
Buy a Haynes manual they are extremly handy to have around

which block is this going into?

Search in google: "How engines work"
and your z6 is gunna love the stock fuel setup on boost:smokin:

aftermarket fuel pump, greddy emanage.. i found a link, its pretty straight forward

if you need any fab work done i can help. aaron 905.802.4703

ur gonna need to notch the block to give the rods clerance

I'm sure you already know this, but with the Cometic HG you must have both the head and block surfaces decked to a mirror finish or the Cometic MLS HG will NOT seal!

what turbo kit you running on what gains you except?

don't use greddy emanage....sell it and use that money to buy some bigger injectors (440cc minimum) and get the car tuned with crome. With emanage you need extra harness' ($$$$$) to have control over the ignition timing.

i use emanage daily its great.. thanks tho