GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   honda / acura (https://www.gtcarz.com/honda-acura-66/)
-   -   what will i need to put a b16a2 engine into my 92 honda civic? (and don't (https://www.gtcarz.com/honda-acura-66/what-will-i-need-put-b16a2-engine-into-my-92-honda-civic-dont-270252/)

civicfan2017 06-03-2007 10:49 PM

what will i need to put a b16a2 engine into my 92 honda civic? (and don't
 
leave any details out)? i'm also going from an automatic to a stick

imported_Drift King 06-03-2007 11:03 PM

The B-series engine will not adapt to the transaxle that came with your Civic, therefore the entire powertrain, i.e. engine and transaxle, must be swapped as a unit; normally, however, the entire powertrain is what is meant when "engine" swaps or availability of used "engines" is discussed with respect to front wheel drive cars.The stock Honda motor mounts, axles, transmission linkage, and other auxiliary parts on the B-series engine (as well as the ECU, of course) will adapt to the Civic. The corresponding parts that came with the stock SOHC D-series engines will not fit the B-series, however. Unfortunately, most of the available engines are removed from the car without any of these parts, and often even the wiring harness has been destroyed, so the parts have to obtained by either scouring junkyards or purchased from Honda at substantial expense. If at all possible, an engine with a complete set of these parts is greatly to be desired over just the engine itself for this kind of swap.If the engine is complete with these parts, very little else is needed for the 1992 Civic.For more info use the link below































en.wikipedia.org


All times are GMT -4. The time now is 08:40 AM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.05845 seconds with 5 queries