ysk 1
Thread Starter
~~ Hardcore Newb ~~
Joined: Oct 2008
Posts: 6
From: bowmanville/courtice
Rep Power: 0 
ysk 1
Ok, Im new to this forum. New to hondas period. But i did some research and thought i would buy a little bit of a project car to make my winter car/grocery getter. i ended up with a 91 ef with a b16a and ysk 1 tranny. The car was in pieces when i got it and its missing a few random parts.
when i got the car i was told of a clutch problem, so i pulled the already stripped and loose motor out of the car. tranny off and the clutch looked fine, overheated but ok. Long story short the motor went in and right back out again. Both trannys are doing the same thing, cant find neutral. I brought the better looking of the two to my local tranny shop and found out the bearing between the secondary shaft and fifth gear had welded its self to the shaft. I am still waiting on the shop to call me back.
Any input is much appreciated
New Update
the tranny shop called me back. aside from the YSK 1 marking theres no other identification markings on the case. im telling them it is from a 90-91 integra gsr b17... but still no luck anyone with input or a parts source available im in need of tranny parts
when i got the car i was told of a clutch problem, so i pulled the already stripped and loose motor out of the car. tranny off and the clutch looked fine, overheated but ok. Long story short the motor went in and right back out again. Both trannys are doing the same thing, cant find neutral. I brought the better looking of the two to my local tranny shop and found out the bearing between the secondary shaft and fifth gear had welded its self to the shaft. I am still waiting on the shop to call me back.
Any input is much appreciated
New Update
the tranny shop called me back. aside from the YSK 1 marking theres no other identification markings on the case. im telling them it is from a 90-91 integra gsr b17... but still no luck anyone with input or a parts source available im in need of tranny parts
Last edited by vtecdan; Oct 21, 2008 at 01:55 PM. Reason: Automerged Doublepost