GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   Honda Mailing List (https://www.gtcarz.com/honda-mailing-list-327/)
-   -   1988 Prelude stalling & idling erratically (https://www.gtcarz.com/honda-mailing-list-327/1988-prelude-stalling-idling-erratically-286229/)

Matthew Brown 06-19-2004 05:46 PM

1988 Prelude stalling & idling erratically
 
Here are the symptoms that plague my 1988 Prelude S ( twin carbs).

When it starts, it will stall immediately three or so times in the morning
before it will maintain a steady idle.

The car will idle steadily and perfectly at times-- and other times it
will seem weak and erratic.

Today the car started to stall on me a time or two when I come out of
accelerated bursts and cruise to a stop (Manual transmission). In other
words, if I am running along at 35mph and need to stop or turn, as I shift
out of gear and the car would normally fall in rpms, tachometer will fall
all the way to 0 and the engine will stall.


Here are the steps that I have taken so far.

New Plugs-- New wires-- New Distributor Cap and rotor.

Each of these things helped for a few days or so, but the problem continues
to return.

What might be my problem, and what should my next step be-- new ignition
coil and igniter-- or maybe a new distributor??


All help is appreciated and welcome

Thank You,

Matthew Brown
Memphis



Tony Hwang 06-19-2004 10:28 PM

Re: 1988 Prelude stalling & idling erratically
 
Matthew Brown wrote:

> Here are the symptoms that plague my 1988 Prelude S ( twin carbs).
>
> When it starts, it will stall immediately three or so times in the morning
> before it will maintain a steady idle.
>
> The car will idle steadily and perfectly at times-- and other times it
> will seem weak and erratic.
>
> Today the car started to stall on me a time or two when I come out of
> accelerated bursts and cruise to a stop (Manual transmission). In other
> words, if I am running along at 35mph and need to stop or turn, as I shift
> out of gear and the car would normally fall in rpms, tachometer will fall
> all the way to 0 and the engine will stall.
>
>
> Here are the steps that I have taken so far.
>
> New Plugs-- New wires-- New Distributor Cap and rotor.
>
> Each of these things helped for a few days or so, but the problem continues
> to return.
>
> What might be my problem, and what should my next step be-- new ignition
> coil and igniter-- or maybe a new distributor??
>
>
> All help is appreciated and welcome
>
> Thank You,
>
> Matthew Brown
> Memphis
>
>

Hi,
Ccheck fuel pump ground. make sure it is well grounded.
Tony


Yuri Nebogatov 06-22-2004 03:43 PM

Re: 1988 Prelude stalling & idling erratically
 
If I had to guess, I'd say it's the transmission. It seems that you're
having a lot of friction even in neutral... possibly the worn synchros are
somehow contacting, I'm not entirely sure of the details. THis would explain
why idling (in neutral) is unpredictable, and why the engine sometimes dies
when switching back into neutral (the transmission puts load on the engine
through the friction, in neutral, causing it to die).

First of all, change the transmission oil (Honda MTF).
Flushing it with extensive amounts of oil is preferable, if you're lucky you
might wash out your problems....
If that doesnt help, you might be looking at a very expensive overhaul /
replacement.

"Tony Hwang" <dragon40@shaw.ca> wrote in message
news:_C6Bc.820634$Ig.791610@pd7tw2no...
> Matthew Brown wrote:
>
> > Here are the symptoms that plague my 1988 Prelude S ( twin carbs).
> >
> > When it starts, it will stall immediately three or so times in the

morning
> > before it will maintain a steady idle.
> >
> > The car will idle steadily and perfectly at times-- and other times

it
> > will seem weak and erratic.
> >
> > Today the car started to stall on me a time or two when I come out

of
> > accelerated bursts and cruise to a stop (Manual transmission). In other
> > words, if I am running along at 35mph and need to stop or turn, as I

shift
> > out of gear and the car would normally fall in rpms, tachometer will

fall
> > all the way to 0 and the engine will stall.
> >
> >
> > Here are the steps that I have taken so far.
> >
> > New Plugs-- New wires-- New Distributor Cap and rotor.
> >
> > Each of these things helped for a few days or so, but the problem

continues
> > to return.
> >
> > What might be my problem, and what should my next step be-- new ignition
> > coil and igniter-- or maybe a new distributor??
> >
> >
> > All help is appreciated and welcome
> >
> > Thank You,
> >
> > Matthew Brown
> > Memphis
> >
> >

> Hi,
> Ccheck fuel pump ground. make sure it is well grounded.
> Tony
>




Des & Co 07-29-2004 06:14 PM

Re: 1988 Prelude stalling & idling erratically
 

"Matthew Brown" <sliceoflifephoto@worldnet.att.net> wrote in message
news:Eu2Bc.98753$Gx4.55072@bgtnsc04-news.ops.worldnet.att.net...
> Here are the symptoms that plague my 1988 Prelude S ( twin carbs).
>
> When it starts, it will stall immediately three or so times in the

morning
> before it will maintain a steady idle.
>
> The car will idle steadily and perfectly at times-- and other times it
> will seem weak and erratic.
>
> Today the car started to stall on me a time or two when I come out of
> accelerated bursts and cruise to a stop (Manual transmission). In other
> words, if I am running along at 35mph and need to stop or turn, as I shift
> out of gear and the car would normally fall in rpms, tachometer will fall
> all the way to 0 and the engine will stall.
>
>
> Here are the steps that I have taken so far.
>
> New Plugs-- New wires-- New Distributor Cap and rotor.
>
> Each of these things helped for a few days or so, but the problem

continues
> to return.
>
> What might be my problem, and what should my next step be-- new ignition
> coil and igniter-- or maybe a new distributor??
>
>
> All help is appreciated and welcome
>
> Thank You,
>
> Matthew Brown
> Memphis
>
>

Go to the base of the carburettors and you'll find three screws holding the
cover of each on. Remove them and slide the covers off; inside each will be
a large "float". These become coated with a sort of yellow varnish after a
few years and they tend to "stick". Clean them with Brasso or Duraglit until
the deposit is completely removed and reassemble. You'd be advised to make a
mark on each before you start to make certain you reassemble them with the
barrels slipped on in exactly the same position.

D.



Des & Co 07-29-2004 06:14 PM

Re: 1988 Prelude stalling & idling erratically
 

"Matthew Brown" <sliceoflifephoto@worldnet.att.net> wrote in message
news:Eu2Bc.98753$Gx4.55072@bgtnsc04-news.ops.worldnet.att.net...
> Here are the symptoms that plague my 1988 Prelude S ( twin carbs).
>
> When it starts, it will stall immediately three or so times in the

morning
> before it will maintain a steady idle.
>
> The car will idle steadily and perfectly at times-- and other times it
> will seem weak and erratic.
>
> Today the car started to stall on me a time or two when I come out of
> accelerated bursts and cruise to a stop (Manual transmission). In other
> words, if I am running along at 35mph and need to stop or turn, as I shift
> out of gear and the car would normally fall in rpms, tachometer will fall
> all the way to 0 and the engine will stall.
>
>
> Here are the steps that I have taken so far.
>
> New Plugs-- New wires-- New Distributor Cap and rotor.
>
> Each of these things helped for a few days or so, but the problem

continues
> to return.
>
> What might be my problem, and what should my next step be-- new ignition
> coil and igniter-- or maybe a new distributor??
>
>
> All help is appreciated and welcome
>
> Thank You,
>
> Matthew Brown
> Memphis
>
>

Go to the base of the carburettors and you'll find three screws holding the
cover of each on. Remove them and slide the covers off; inside each will be
a large "float". These become coated with a sort of yellow varnish after a
few years and they tend to "stick". Clean them with Brasso or Duraglit until
the deposit is completely removed and reassemble. You'd be advised to make a
mark on each before you start to make certain you reassemble them with the
barrels slipped on in exactly the same position.

D.




All times are GMT -4. The time now is 06:06 AM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.07508 seconds with 5 queries