1989 Accord Front Upper Control Arm
I replaced the upper control arm on my 1989 Accord, the ball joint was
shot. I also put in new bushings. The control arm and bushings were after market (Moog). I re-assembled the control arm as per the shop manual. Now I have a noise (sort of like a cracking) when the suspension is flexed up and down on the side that was replaced. It seems to be coming from the bushings. Has anybody experienced this before ? I used chassis grease when I re-assembled the control arm. Any help would be appreciated. |
Re: 1989 Accord Front Upper Control Arm
How did you install the bushings? You want to make sure that you don't
damage the flat side when installing them, or they can make noise... I buggered up a pair recently when I got into a hurry, and they squeaked for a little while. "nospam" <nospam@nospam.com> wrote in message news:410B9D88.DCFB908C@nospam.com... > I replaced the upper control arm on my 1989 Accord, the ball joint was > shot. I also put in new bushings. The control arm and bushings were > after market (Moog). I re-assembled the control arm as per the shop > manual. Now I have a noise (sort of like a cracking) when the > suspension is flexed up and down on the side that was replaced. It > seems to be coming from the bushings. Has anybody experienced this > before ? I used chassis grease when I re-assembled the control arm. > Any help would be appreciated. > |
Re: 1989 Accord Front Upper Control Arm
How did you install the bushings? You want to make sure that you don't
damage the flat side when installing them, or they can make noise... I buggered up a pair recently when I got into a hurry, and they squeaked for a little while. "nospam" <nospam@nospam.com> wrote in message news:410B9D88.DCFB908C@nospam.com... > I replaced the upper control arm on my 1989 Accord, the ball joint was > shot. I also put in new bushings. The control arm and bushings were > after market (Moog). I re-assembled the control arm as per the shop > manual. Now I have a noise (sort of like a cracking) when the > suspension is flexed up and down on the side that was replaced. It > seems to be coming from the bushings. Has anybody experienced this > before ? I used chassis grease when I re-assembled the control arm. > Any help would be appreciated. > |
All times are GMT -4. The time now is 12:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands