1989 Honda Accord Timing Belt Change issue
 

Here is the background....

1989 Honda Accord, 2.0 FI SOHC 5 speed, 205K miles.

Timing belt went out while taking off from a red light.

Got the belt changed out; the marks lined up perfectly (so I think)


The Problem:

Car will start and run for about 10 seconds at 3000 RPM and then shut down.
It will do this EVERY time I fire up the car. The engine seems to sound
fine.

Did I miss something in the change??? Here are some thoughts.

- Belt one tooth off
- never touched the balance shaft (never found any data to tell me to)
- wicked vacuum leak

Any help is appreciated


John