1990 Honda Accord Cooling Fan Not Working!
I have a 1990 Honda Accord that I just purchased a few weeks ago...The
other day the temp gauge went to the max...I realized the cooling fan is not coming on at all. I don't know much about cars at all but I checked the cooling fan (15A) fuse and it's ok...I also checked the Cooling fan relay and it looks ok. Is there anything else I can do/check to try and fix this or would anyone know what could be wrong. I doubt it has anything to do with it but this happened right after I had some stuff done at Jiffy Lube. Any help is appreciated! Thanks! |
Re: 1990 Honda Accord Cooling Fan Not Working!
weingartdude@yahoo.com wrote:
> > I have a 1990 Honda Accord that I just purchased a few weeks ago...The > other day the temp gauge went to the max...I realized the cooling fan > is not coming on at all. I don't know much about cars at all but I > checked the cooling fan (15A) fuse and it's ok...I also checked the > Cooling fan relay and it looks ok. Is there anything else I can > do/check to try and fix this or would anyone know what could be wrong. > I doubt it has anything to do with it but this happened right after I > had some stuff done at Jiffy Lube. Any help is appreciated! Thanks! --------------------------------------- Nothing seems to work right on Honda cooling systems if the reservoir isn't full enough. When the thermostat opens the level goes low and the coolant switch won't cut in if it's not immersed. Fill the reservoir to the MAX mark, and inspect it three days in a row. Use honda premix or at least distilled water if you have to. No tap water. In a pinch you can turn on the HEAT or the AC to get the problem under control, but you risk cracking / warping your head every minute you run it with LOW coolant (air in cooling system). 'Curly' |
Re: 1990 Honda Accord Cooling Fan Not Working!
weingartdude@yahoo.com wrote:
> > I have a 1990 Honda Accord that I just purchased a few weeks ago...The > other day the temp gauge went to the max...I realized the cooling fan > is not coming on at all. I don't know much about cars at all but I > checked the cooling fan (15A) fuse and it's ok...I also checked the > Cooling fan relay and it looks ok. Is there anything else I can > do/check to try and fix this or would anyone know what could be wrong. > I doubt it has anything to do with it but this happened right after I > had some stuff done at Jiffy Lube. Any help is appreciated! Thanks! --------------------------------------- Nothing seems to work right on Honda cooling systems if the reservoir isn't full enough. When the thermostat opens the level goes low and the coolant switch won't cut in if it's not immersed. Fill the reservoir to the MAX mark, and inspect it three days in a row. Use honda premix or at least distilled water if you have to. No tap water. In a pinch you can turn on the HEAT or the AC to get the problem under control, but you risk cracking / warping your head every minute you run it with LOW coolant (air in cooling system). 'Curly' |
Re: 1990 Honda Accord Cooling Fan Not Working!
weingartdude@yahoo.com wrote:
> > I have a 1990 Honda Accord that I just purchased a few weeks ago...The > other day the temp gauge went to the max...I realized the cooling fan > is not coming on at all. I don't know much about cars at all but I > checked the cooling fan (15A) fuse and it's ok...I also checked the > Cooling fan relay and it looks ok. Is there anything else I can > do/check to try and fix this or would anyone know what could be wrong. > I doubt it has anything to do with it but this happened right after I > had some stuff done at Jiffy Lube. Any help is appreciated! Thanks! --------------------------------------- Nothing seems to work right on Honda cooling systems if the reservoir isn't full enough. When the thermostat opens the level goes low and the coolant switch won't cut in if it's not immersed. Fill the reservoir to the MAX mark, and inspect it three days in a row. Use honda premix or at least distilled water if you have to. No tap water. In a pinch you can turn on the HEAT or the AC to get the problem under control, but you risk cracking / warping your head every minute you run it with LOW coolant (air in cooling system). 'Curly' |
Re: 1990 Honda Accord Cooling Fan Not Working!
weingartdude@yahoo.com wrote in
news:1150239200.267171.321350@g10g2000cwb.googlegr oups.com: > I have a 1990 Honda Accord that I just purchased a few weeks ago...The > other day the temp gauge went to the max...I realized the cooling fan > is not coming on at all. I don't know much about cars at all but I > checked the cooling fan (15A) fuse and it's ok...I also checked the > Cooling fan relay and it looks ok. Is there anything else I can > do/check to try and fix this or would anyone know what could be wrong. > I doubt it has anything to do with it but this happened right after I > had some stuff done at Jiffy Lube. Any help is appreciated! Thanks! > > Some older Civic-based vehicles have their fan switches right next to the oil filter. Ham-handed filter removal attempts can crack the switch, rendering it inoperative. I don't know where your switch is, as my manual has no diagram for that. But it's certainly worth having a look. -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Re: 1990 Honda Accord Cooling Fan Not Working!
weingartdude@yahoo.com wrote in
news:1150239200.267171.321350@g10g2000cwb.googlegr oups.com: > I have a 1990 Honda Accord that I just purchased a few weeks ago...The > other day the temp gauge went to the max...I realized the cooling fan > is not coming on at all. I don't know much about cars at all but I > checked the cooling fan (15A) fuse and it's ok...I also checked the > Cooling fan relay and it looks ok. Is there anything else I can > do/check to try and fix this or would anyone know what could be wrong. > I doubt it has anything to do with it but this happened right after I > had some stuff done at Jiffy Lube. Any help is appreciated! Thanks! > > Some older Civic-based vehicles have their fan switches right next to the oil filter. Ham-handed filter removal attempts can crack the switch, rendering it inoperative. I don't know where your switch is, as my manual has no diagram for that. But it's certainly worth having a look. -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Re: 1990 Honda Accord Cooling Fan Not Working!
weingartdude@yahoo.com wrote in
news:1150239200.267171.321350@g10g2000cwb.googlegr oups.com: > I have a 1990 Honda Accord that I just purchased a few weeks ago...The > other day the temp gauge went to the max...I realized the cooling fan > is not coming on at all. I don't know much about cars at all but I > checked the cooling fan (15A) fuse and it's ok...I also checked the > Cooling fan relay and it looks ok. Is there anything else I can > do/check to try and fix this or would anyone know what could be wrong. > I doubt it has anything to do with it but this happened right after I > had some stuff done at Jiffy Lube. Any help is appreciated! Thanks! > > Some older Civic-based vehicles have their fan switches right next to the oil filter. Ham-handed filter removal attempts can crack the switch, rendering it inoperative. I don't know where your switch is, as my manual has no diagram for that. But it's certainly worth having a look. -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Re: 1990 Honda Accord Cooling Fan Not Working!
weingartdude@yahoo.com wrote:
> I have a 1990 Honda Accord that I just purchased a few weeks ago...The > other day the temp gauge went to the max...I realized the cooling fan > is not coming on at all. I don't know much about cars at all but I > checked the cooling fan (15A) fuse and it's ok...I also checked the > Cooling fan relay and it looks ok. Is there anything else I can > do/check to try and fix this or would anyone know what could be wrong. > I doubt it has anything to do with it but this happened right after I > had some stuff done at Jiffy Lube. Any help is appreciated! Thanks! > The 90 Accord has a nice bleeder valve on the thermostat housing (10mm deep socket?). I use a small diameter clear vinyl hose, open the valve, and push the hose on the valve end. With the engine running, fill the radiator and let the car get to operating temp. Put the other end of the hose in your antifreeze jug and let the system purge of ALL the air. You'll see the stream from the hose run without bubbles. Close the valve, and instal the rad cap. The radiator cooling fan should come on. Be sure the coolant overflow bottle is half full. Check the radiator and hoses for leaks. Watch the temp gauge on your next trip. bob |
Re: 1990 Honda Accord Cooling Fan Not Working!
weingartdude@yahoo.com wrote:
> I have a 1990 Honda Accord that I just purchased a few weeks ago...The > other day the temp gauge went to the max...I realized the cooling fan > is not coming on at all. I don't know much about cars at all but I > checked the cooling fan (15A) fuse and it's ok...I also checked the > Cooling fan relay and it looks ok. Is there anything else I can > do/check to try and fix this or would anyone know what could be wrong. > I doubt it has anything to do with it but this happened right after I > had some stuff done at Jiffy Lube. Any help is appreciated! Thanks! > The 90 Accord has a nice bleeder valve on the thermostat housing (10mm deep socket?). I use a small diameter clear vinyl hose, open the valve, and push the hose on the valve end. With the engine running, fill the radiator and let the car get to operating temp. Put the other end of the hose in your antifreeze jug and let the system purge of ALL the air. You'll see the stream from the hose run without bubbles. Close the valve, and instal the rad cap. The radiator cooling fan should come on. Be sure the coolant overflow bottle is half full. Check the radiator and hoses for leaks. Watch the temp gauge on your next trip. bob |
Re: 1990 Honda Accord Cooling Fan Not Working!
weingartdude@yahoo.com wrote:
> I have a 1990 Honda Accord that I just purchased a few weeks ago...The > other day the temp gauge went to the max...I realized the cooling fan > is not coming on at all. I don't know much about cars at all but I > checked the cooling fan (15A) fuse and it's ok...I also checked the > Cooling fan relay and it looks ok. Is there anything else I can > do/check to try and fix this or would anyone know what could be wrong. > I doubt it has anything to do with it but this happened right after I > had some stuff done at Jiffy Lube. Any help is appreciated! Thanks! > The 90 Accord has a nice bleeder valve on the thermostat housing (10mm deep socket?). I use a small diameter clear vinyl hose, open the valve, and push the hose on the valve end. With the engine running, fill the radiator and let the car get to operating temp. Put the other end of the hose in your antifreeze jug and let the system purge of ALL the air. You'll see the stream from the hose run without bubbles. Close the valve, and instal the rad cap. The radiator cooling fan should come on. Be sure the coolant overflow bottle is half full. Check the radiator and hoses for leaks. Watch the temp gauge on your next trip. bob |
Re: 1990 Honda Accord Cooling Fan Not Working! CORRECTION
N.E.Ohio Bob wrote:
> weingartdude@yahoo.com wrote: > >> I have a 1990 Honda Accord that I just purchased a few weeks ago...The >> other day the temp gauge went to the max...I realized the cooling fan >> is not coming on at all. I don't know much about cars at all but I >> checked the cooling fan (15A) fuse and it's ok...I also checked the >> Cooling fan relay and it looks ok. Is there anything else I can >> do/check to try and fix this or would anyone know what could be wrong. >> I doubt it has anything to do with it but this happened right after I >> had some stuff done at Jiffy Lube. Any help is appreciated! Thanks! >> > > The 90 Accord has a nice bleeder valve on the thermostat housing > (10mm deep socket?). I use a small diameter clear vinyl hose, open the > valve, and push the hose on the valve end. With the engine running, fill > the radiator and let the car get to operating temp. Put the other end of > the hose in your antifreeze jug and let the system purge of ALL the air. > You'll see the stream from the hose run without bubbles. Close the > valve, and instal the rad cap. The radiator cooling fan should come on. > Be sure the coolant overflow bottle is half full. Check the radiator > and hoses for leaks. Watch the temp gauge on your next trip. bob The valve uses a 12mm deep socket, and you will need six feet of vinyl hose that has an inside diameter of 1/4 inch. bob |
Re: 1990 Honda Accord Cooling Fan Not Working! CORRECTION
N.E.Ohio Bob wrote:
> weingartdude@yahoo.com wrote: > >> I have a 1990 Honda Accord that I just purchased a few weeks ago...The >> other day the temp gauge went to the max...I realized the cooling fan >> is not coming on at all. I don't know much about cars at all but I >> checked the cooling fan (15A) fuse and it's ok...I also checked the >> Cooling fan relay and it looks ok. Is there anything else I can >> do/check to try and fix this or would anyone know what could be wrong. >> I doubt it has anything to do with it but this happened right after I >> had some stuff done at Jiffy Lube. Any help is appreciated! Thanks! >> > > The 90 Accord has a nice bleeder valve on the thermostat housing > (10mm deep socket?). I use a small diameter clear vinyl hose, open the > valve, and push the hose on the valve end. With the engine running, fill > the radiator and let the car get to operating temp. Put the other end of > the hose in your antifreeze jug and let the system purge of ALL the air. > You'll see the stream from the hose run without bubbles. Close the > valve, and instal the rad cap. The radiator cooling fan should come on. > Be sure the coolant overflow bottle is half full. Check the radiator > and hoses for leaks. Watch the temp gauge on your next trip. bob The valve uses a 12mm deep socket, and you will need six feet of vinyl hose that has an inside diameter of 1/4 inch. bob |
Re: 1990 Honda Accord Cooling Fan Not Working! CORRECTION
N.E.Ohio Bob wrote:
> weingartdude@yahoo.com wrote: > >> I have a 1990 Honda Accord that I just purchased a few weeks ago...The >> other day the temp gauge went to the max...I realized the cooling fan >> is not coming on at all. I don't know much about cars at all but I >> checked the cooling fan (15A) fuse and it's ok...I also checked the >> Cooling fan relay and it looks ok. Is there anything else I can >> do/check to try and fix this or would anyone know what could be wrong. >> I doubt it has anything to do with it but this happened right after I >> had some stuff done at Jiffy Lube. Any help is appreciated! Thanks! >> > > The 90 Accord has a nice bleeder valve on the thermostat housing > (10mm deep socket?). I use a small diameter clear vinyl hose, open the > valve, and push the hose on the valve end. With the engine running, fill > the radiator and let the car get to operating temp. Put the other end of > the hose in your antifreeze jug and let the system purge of ALL the air. > You'll see the stream from the hose run without bubbles. Close the > valve, and instal the rad cap. The radiator cooling fan should come on. > Be sure the coolant overflow bottle is half full. Check the radiator > and hoses for leaks. Watch the temp gauge on your next trip. bob The valve uses a 12mm deep socket, and you will need six feet of vinyl hose that has an inside diameter of 1/4 inch. bob |
Re: 1990 Honda Accord Cooling Fan Not Working!
N.E.Ohio Bob wrote: > The 90 Accord has a nice bleeder valve on the thermostat housing (10mm > deep socket?). I use a small diameter clear vinyl hose, open the valve, > and push the hose on the valve end. With the engine running, fill the > radiator and let the car get to operating temp. Put the other end of the > hose in your antifreeze jug and let the system purge of ALL the air. > You'll see the stream from the hose run without bubbles. Close the > valve, and instal the rad cap. And be super careful not to overtighten the screw otherwise it will strip out and hot water will gush out on your face and neck. |
Re: 1990 Honda Accord Cooling Fan Not Working!
N.E.Ohio Bob wrote: > The 90 Accord has a nice bleeder valve on the thermostat housing (10mm > deep socket?). I use a small diameter clear vinyl hose, open the valve, > and push the hose on the valve end. With the engine running, fill the > radiator and let the car get to operating temp. Put the other end of the > hose in your antifreeze jug and let the system purge of ALL the air. > You'll see the stream from the hose run without bubbles. Close the > valve, and instal the rad cap. And be super careful not to overtighten the screw otherwise it will strip out and hot water will gush out on your face and neck. |
All times are GMT -4. The time now is 02:18 PM. |
© 2024 MH Sub I, LLC dba Internet Brands