GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   Honda Mailing List (https://www.gtcarz.com/honda-mailing-list-327/)
-   -   1990 Honda suspension noise (https://www.gtcarz.com/honda-mailing-list-327/1990-honda-suspension-noise-400796/)

nospam 08-06-2009 05:13 PM

1990 Honda suspension noise
 
1990 Honda Accord

on sharp curves over 20 mph there is a whining/rubbing noise. Other than
that its fine.

any guess as to what the problem is ?

Gene




JRE 08-06-2009 08:24 PM

Re: 1990 Honda suspension noise
 
nospam wrote:
> 1990 Honda Accord
>
> on sharp curves over 20 mph there is a whining/rubbing noise. Other than
> that its fine.
>
> any guess as to what the problem is ?
>
> Gene


Without hearing the noise, my guess is wheel bearing or (possibly) CV
joint. Wheel bearings can take a long time to die, usually, and get
progressively noisier as they go until they roar pretty loudly. CV
joints usually make a rapid clunking noise in very tight low-speed turns
when they start to go bad.

The wheel bearing on the '90 is a real PITA to change. Consider having
it done if that's what the problem is.

--
JRE

Tegger 08-06-2009 08:43 PM

Re: 1990 Honda suspension noise
 
"nospam" <nospam@nospam.com> wrote in news:4a7b34fa$0$24461
$9a6e19ea@news.newshosting.com:

> 1990 Honda Accord
>
> on sharp curves over 20 mph there is a whining/rubbing noise. Other than
> that its fine.
>
> any guess as to what the problem is ?
>




Does the noise happen only when turning in ONE direction?


--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

jim beam 08-07-2009 12:15 AM

Re: 1990 Honda suspension noise
 
nospam wrote:
> 1990 Honda Accord
>
> on sharp curves over 20 mph there is a whining/rubbing noise. Other than
> that its fine.
>
> any guess as to what the problem is ?
>
> Gene
>
>
>


have you changed the disc or caliper recently? there's a different
thickness in disks between 89 & 90, [89 is skinnier] and the caliper
needs to be correct to accommodate. if there's an incorrect caliper
relative to the disk, you'll hear a scraping noise when you corner. or
it's just a bearing. time to inspect.

nospam 08-07-2009 01:42 AM

Re: 1990 Honda suspension noise
 

"Tegger" <invalid@invalid.inv> wrote in message
news:Xns9C5FD2CBD6A53tegger@208.90.168.18...
> "nospam" <nospam@nospam.com> wrote in news:4a7b34fa$0$24461
> $9a6e19ea@news.newshosting.com:
>
> > 1990 Honda Accord
> >
> > on sharp curves over 20 mph there is a whining/rubbing noise. Other than
> > that its fine.
> >
> > any guess as to what the problem is ?
> >

>
>
>
> Does the noise happen only when turning in ONE direction?
>
>
> --
> Tegger
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/


noise is the same in both directions




All times are GMT -4. The time now is 10:29 PM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.06189 seconds with 5 queries