1995 Prelude SE timing belt
#1
Guest
Posts: n/a
1995 Prelude SE timing belt
It's time for timing belt service on my 1995 Prelude SE (H23A 2.3 liter
engine). The belts/water pump, etc. were last replaced in early 2000, about
60k miles ago. This time around, I'd like to do it myself. I have the
factory manual from Helm, but I'm wondering if anyone here has any tips or
tricks that might save time and frustration. I know I need to replace the
timing belt, balancer belt and water pump. In addition, I know there is at
least one seal behind the timing cover that is slowly leaking oil, so I'll
need to replace that as well. The local shop would charge around $500 for
all of this, and while that's not a bad price per se, I love to save money
when I can.
Any tips or suggestions are welcome and appreciated (especially concerning
the seals), including "just take it to the shop anyway."
engine). The belts/water pump, etc. were last replaced in early 2000, about
60k miles ago. This time around, I'd like to do it myself. I have the
factory manual from Helm, but I'm wondering if anyone here has any tips or
tricks that might save time and frustration. I know I need to replace the
timing belt, balancer belt and water pump. In addition, I know there is at
least one seal behind the timing cover that is slowly leaking oil, so I'll
need to replace that as well. The local shop would charge around $500 for
all of this, and while that's not a bad price per se, I love to save money
when I can.
Any tips or suggestions are welcome and appreciated (especially concerning
the seals), including "just take it to the shop anyway."
Thread
Thread Starter
Forum
Replies
Last Post
fish
Honda Mailing List
36
08-12-2006 11:34 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)