|
2001 Civic
got a 2001 civic, have to adjust the headlights, one is pointed down
slightly.. i know park it with teh lights on by a building and then back up about 20 feet and see where the one out of alignment is moving to and then just adjust it... but on this car i cant get a socket in to get to what looks like the 10 mm bolt to do anything to it... i can get an opne end wrench on it (10 MM), but cant turn it as there is no room with the sheet metal blocking the movement of the wrench.... and i can only find one bolt, i guess its for the up and down movement???? its ont he upper left(sitting in the car) on the left headlight in back of it.... any help or web sites??? thanks for a reply.... |
Re: 2001 Civic
Go get one of those tools that looks like a screw driver but has the 10mm
hex end instead of an acutal screwdriver tip. Those are usually slimmer than a socket. Worst case scenario, try needle-nose pliers, but be careful if you go that route. Good luck! Jonathan "jim" <jim@noname.com> wrote in message news:40156992.578B@noname.com... > got a 2001 civic, have to adjust the headlights, one is pointed down > slightly.. i know park it with teh lights on by a building and then back > up about 20 feet and see where the one out of alignment is moving to and > then just adjust it... but on this car i cant get a socket in to get to > what looks like the 10 mm bolt to do anything to it... i can get an opne > end wrench on it (10 MM), but cant turn it as there is no room with the > sheet metal blocking the movement of the wrench.... and i can only find > one bolt, i guess its for the up and down movement???? its ont he upper > left(sitting in the car) on the left headlight in back of it.... > any help or web sites??? thanks for a reply.... |
Re: 2001 Civic
Go get one of those tools that looks like a screw driver but has the 10mm
hex end instead of an acutal screwdriver tip. Those are usually slimmer than a socket. Worst case scenario, try needle-nose pliers, but be careful if you go that route. Good luck! Jonathan "jim" <jim@noname.com> wrote in message news:40156992.578B@noname.com... > got a 2001 civic, have to adjust the headlights, one is pointed down > slightly.. i know park it with teh lights on by a building and then back > up about 20 feet and see where the one out of alignment is moving to and > then just adjust it... but on this car i cant get a socket in to get to > what looks like the 10 mm bolt to do anything to it... i can get an opne > end wrench on it (10 MM), but cant turn it as there is no room with the > sheet metal blocking the movement of the wrench.... and i can only find > one bolt, i guess its for the up and down movement???? its ont he upper > left(sitting in the car) on the left headlight in back of it.... > any help or web sites??? thanks for a reply.... |
Re: 2001 Civic
Go get one of those tools that looks like a screw driver but has the 10mm
hex end instead of an acutal screwdriver tip. Those are usually slimmer than a socket. Worst case scenario, try needle-nose pliers, but be careful if you go that route. Good luck! Jonathan "jim" <jim@noname.com> wrote in message news:40156992.578B@noname.com... > got a 2001 civic, have to adjust the headlights, one is pointed down > slightly.. i know park it with teh lights on by a building and then back > up about 20 feet and see where the one out of alignment is moving to and > then just adjust it... but on this car i cant get a socket in to get to > what looks like the 10 mm bolt to do anything to it... i can get an opne > end wrench on it (10 MM), but cant turn it as there is no room with the > sheet metal blocking the movement of the wrench.... and i can only find > one bolt, i guess its for the up and down movement???? its ont he upper > left(sitting in the car) on the left headlight in back of it.... > any help or web sites??? thanks for a reply.... |
Re: 2001 Civic
Go get one of those tools that looks like a screw driver but has the 10mm
hex end instead of an acutal screwdriver tip. Those are usually slimmer than a socket. Worst case scenario, try needle-nose pliers, but be careful if you go that route. Good luck! Jonathan "jim" <jim@noname.com> wrote in message news:40156992.578B@noname.com... > got a 2001 civic, have to adjust the headlights, one is pointed down > slightly.. i know park it with teh lights on by a building and then back > up about 20 feet and see where the one out of alignment is moving to and > then just adjust it... but on this car i cant get a socket in to get to > what looks like the 10 mm bolt to do anything to it... i can get an opne > end wrench on it (10 MM), but cant turn it as there is no room with the > sheet metal blocking the movement of the wrench.... and i can only find > one bolt, i guess its for the up and down movement???? its ont he upper > left(sitting in the car) on the left headlight in back of it.... > any help or web sites??? thanks for a reply.... |
Re: 2001 Civic
Jonathan Upright wrote:
> > Go get one of those tools that looks like a screw driver but has the 10mm > hex end instead of an acutal screwdriver tip. Those are usually slimmer > than a socket. Worst case scenario, try needle-nose pliers, but be careful > if you go that route. > > Good luck! > > Jonathan > > "jim" <jim@noname.com> wrote in message news:40156992.578B@noname.com... > > got a 2001 civic, have to adjust the headlights, one is pointed down > > slightly.. i know park it with teh lights on by a building and then back > > up about 20 feet and see where the one out of alignment is moving to and > > then just adjust it... but on this car i cant get a socket in to get to > > what looks like the 10 mm bolt to do anything to it... i can get an opne > > end wrench on it (10 MM), but cant turn it as there is no room with the > > sheet metal blocking the movement of the wrench.... and i can only find > > one bolt, i guess its for the up and down movement???? its ont he upper > > left(sitting in the car) on the left headlight in back of it.... > > any help or web sites??? thanks for a reply.... thanks, but if you are talking about the 1/4 in drive handle, i got that and the flexible shaft also, even tried the off set ratchet double ended box wrench.. went to harbor freight and bought one, went out to car and tried it.. no room to even get the tool to lay on the bolt...muchless turn it... looks like the flat ratchet might work, but cannot find a 10 mm one at any sears store locally... thanks anyway, just looking for someone that did align their headlights on a 2001 civic... |
Re: 2001 Civic
Jonathan Upright wrote:
> > Go get one of those tools that looks like a screw driver but has the 10mm > hex end instead of an acutal screwdriver tip. Those are usually slimmer > than a socket. Worst case scenario, try needle-nose pliers, but be careful > if you go that route. > > Good luck! > > Jonathan > > "jim" <jim@noname.com> wrote in message news:40156992.578B@noname.com... > > got a 2001 civic, have to adjust the headlights, one is pointed down > > slightly.. i know park it with teh lights on by a building and then back > > up about 20 feet and see where the one out of alignment is moving to and > > then just adjust it... but on this car i cant get a socket in to get to > > what looks like the 10 mm bolt to do anything to it... i can get an opne > > end wrench on it (10 MM), but cant turn it as there is no room with the > > sheet metal blocking the movement of the wrench.... and i can only find > > one bolt, i guess its for the up and down movement???? its ont he upper > > left(sitting in the car) on the left headlight in back of it.... > > any help or web sites??? thanks for a reply.... thanks, but if you are talking about the 1/4 in drive handle, i got that and the flexible shaft also, even tried the off set ratchet double ended box wrench.. went to harbor freight and bought one, went out to car and tried it.. no room to even get the tool to lay on the bolt...muchless turn it... looks like the flat ratchet might work, but cannot find a 10 mm one at any sears store locally... thanks anyway, just looking for someone that did align their headlights on a 2001 civic... |
Re: 2001 Civic
Jonathan Upright wrote:
> > Go get one of those tools that looks like a screw driver but has the 10mm > hex end instead of an acutal screwdriver tip. Those are usually slimmer > than a socket. Worst case scenario, try needle-nose pliers, but be careful > if you go that route. > > Good luck! > > Jonathan > > "jim" <jim@noname.com> wrote in message news:40156992.578B@noname.com... > > got a 2001 civic, have to adjust the headlights, one is pointed down > > slightly.. i know park it with teh lights on by a building and then back > > up about 20 feet and see where the one out of alignment is moving to and > > then just adjust it... but on this car i cant get a socket in to get to > > what looks like the 10 mm bolt to do anything to it... i can get an opne > > end wrench on it (10 MM), but cant turn it as there is no room with the > > sheet metal blocking the movement of the wrench.... and i can only find > > one bolt, i guess its for the up and down movement???? its ont he upper > > left(sitting in the car) on the left headlight in back of it.... > > any help or web sites??? thanks for a reply.... thanks, but if you are talking about the 1/4 in drive handle, i got that and the flexible shaft also, even tried the off set ratchet double ended box wrench.. went to harbor freight and bought one, went out to car and tried it.. no room to even get the tool to lay on the bolt...muchless turn it... looks like the flat ratchet might work, but cannot find a 10 mm one at any sears store locally... thanks anyway, just looking for someone that did align their headlights on a 2001 civic... |
Re: 2001 Civic
Jonathan Upright wrote:
> > Go get one of those tools that looks like a screw driver but has the 10mm > hex end instead of an acutal screwdriver tip. Those are usually slimmer > than a socket. Worst case scenario, try needle-nose pliers, but be careful > if you go that route. > > Good luck! > > Jonathan > > "jim" <jim@noname.com> wrote in message news:40156992.578B@noname.com... > > got a 2001 civic, have to adjust the headlights, one is pointed down > > slightly.. i know park it with teh lights on by a building and then back > > up about 20 feet and see where the one out of alignment is moving to and > > then just adjust it... but on this car i cant get a socket in to get to > > what looks like the 10 mm bolt to do anything to it... i can get an opne > > end wrench on it (10 MM), but cant turn it as there is no room with the > > sheet metal blocking the movement of the wrench.... and i can only find > > one bolt, i guess its for the up and down movement???? its ont he upper > > left(sitting in the car) on the left headlight in back of it.... > > any help or web sites??? thanks for a reply.... thanks, but if you are talking about the 1/4 in drive handle, i got that and the flexible shaft also, even tried the off set ratchet double ended box wrench.. went to harbor freight and bought one, went out to car and tried it.. no room to even get the tool to lay on the bolt...muchless turn it... looks like the flat ratchet might work, but cannot find a 10 mm one at any sears store locally... thanks anyway, just looking for someone that did align their headlights on a 2001 civic... |
Re: 2001 Civic
On 1/26/04 10:07 PM, in article 4015E46D.3B24@noname.com, "jim"
<jim@noname.com> wrote: > Jonathan Upright wrote: >> >> Go get one of those tools that looks like a screw driver but has the 10mm >> hex end instead of an acutal screwdriver tip. Those are usually slimmer >> than a socket. Worst case scenario, try needle-nose pliers, but be careful >> if you go that route. >> >> Good luck! >> >> Jonathan >> >> "jim" <jim@noname.com> wrote in message news:40156992.578B@noname.com... >>> got a 2001 civic, have to adjust the headlights, one is pointed down >>> slightly.. i know park it with teh lights on by a building and then back >>> up about 20 feet and see where the one out of alignment is moving to and >>> then just adjust it... but on this car i cant get a socket in to get to >>> what looks like the 10 mm bolt to do anything to it... i can get an opne >>> end wrench on it (10 MM), but cant turn it as there is no room with the >>> sheet metal blocking the movement of the wrench.... and i can only find >>> one bolt, i guess its for the up and down movement???? its ont he upper >>> left(sitting in the car) on the left headlight in back of it.... >>> any help or web sites??? thanks for a reply.... > thanks, but if you are talking about the 1/4 in drive handle, i got that > and the flexible shaft also, even tried the off set ratchet double ended > box wrench.. went to harbor freight and bought one, went out to car and > tried it.. no room to even get the tool to lay on the bolt...muchless > turn it... looks like the flat ratchet might work, but cannot find a 10 > mm one at any sears store locally... thanks anyway, just looking for > someone that did align their headlights on a 2001 civic... Seems like the easy thing would be to call a Honda dealer (or several) and ask them what tool they use & if there is a "trick" to it. Most of them will just tell you. |
Re: 2001 Civic
On 1/26/04 10:07 PM, in article 4015E46D.3B24@noname.com, "jim"
<jim@noname.com> wrote: > Jonathan Upright wrote: >> >> Go get one of those tools that looks like a screw driver but has the 10mm >> hex end instead of an acutal screwdriver tip. Those are usually slimmer >> than a socket. Worst case scenario, try needle-nose pliers, but be careful >> if you go that route. >> >> Good luck! >> >> Jonathan >> >> "jim" <jim@noname.com> wrote in message news:40156992.578B@noname.com... >>> got a 2001 civic, have to adjust the headlights, one is pointed down >>> slightly.. i know park it with teh lights on by a building and then back >>> up about 20 feet and see where the one out of alignment is moving to and >>> then just adjust it... but on this car i cant get a socket in to get to >>> what looks like the 10 mm bolt to do anything to it... i can get an opne >>> end wrench on it (10 MM), but cant turn it as there is no room with the >>> sheet metal blocking the movement of the wrench.... and i can only find >>> one bolt, i guess its for the up and down movement???? its ont he upper >>> left(sitting in the car) on the left headlight in back of it.... >>> any help or web sites??? thanks for a reply.... > thanks, but if you are talking about the 1/4 in drive handle, i got that > and the flexible shaft also, even tried the off set ratchet double ended > box wrench.. went to harbor freight and bought one, went out to car and > tried it.. no room to even get the tool to lay on the bolt...muchless > turn it... looks like the flat ratchet might work, but cannot find a 10 > mm one at any sears store locally... thanks anyway, just looking for > someone that did align their headlights on a 2001 civic... Seems like the easy thing would be to call a Honda dealer (or several) and ask them what tool they use & if there is a "trick" to it. Most of them will just tell you. |
Re: 2001 Civic
On 1/26/04 10:07 PM, in article 4015E46D.3B24@noname.com, "jim"
<jim@noname.com> wrote: > Jonathan Upright wrote: >> >> Go get one of those tools that looks like a screw driver but has the 10mm >> hex end instead of an acutal screwdriver tip. Those are usually slimmer >> than a socket. Worst case scenario, try needle-nose pliers, but be careful >> if you go that route. >> >> Good luck! >> >> Jonathan >> >> "jim" <jim@noname.com> wrote in message news:40156992.578B@noname.com... >>> got a 2001 civic, have to adjust the headlights, one is pointed down >>> slightly.. i know park it with teh lights on by a building and then back >>> up about 20 feet and see where the one out of alignment is moving to and >>> then just adjust it... but on this car i cant get a socket in to get to >>> what looks like the 10 mm bolt to do anything to it... i can get an opne >>> end wrench on it (10 MM), but cant turn it as there is no room with the >>> sheet metal blocking the movement of the wrench.... and i can only find >>> one bolt, i guess its for the up and down movement???? its ont he upper >>> left(sitting in the car) on the left headlight in back of it.... >>> any help or web sites??? thanks for a reply.... > thanks, but if you are talking about the 1/4 in drive handle, i got that > and the flexible shaft also, even tried the off set ratchet double ended > box wrench.. went to harbor freight and bought one, went out to car and > tried it.. no room to even get the tool to lay on the bolt...muchless > turn it... looks like the flat ratchet might work, but cannot find a 10 > mm one at any sears store locally... thanks anyway, just looking for > someone that did align their headlights on a 2001 civic... Seems like the easy thing would be to call a Honda dealer (or several) and ask them what tool they use & if there is a "trick" to it. Most of them will just tell you. |
Re: 2001 Civic
On 1/26/04 10:07 PM, in article 4015E46D.3B24@noname.com, "jim"
<jim@noname.com> wrote: > Jonathan Upright wrote: >> >> Go get one of those tools that looks like a screw driver but has the 10mm >> hex end instead of an acutal screwdriver tip. Those are usually slimmer >> than a socket. Worst case scenario, try needle-nose pliers, but be careful >> if you go that route. >> >> Good luck! >> >> Jonathan >> >> "jim" <jim@noname.com> wrote in message news:40156992.578B@noname.com... >>> got a 2001 civic, have to adjust the headlights, one is pointed down >>> slightly.. i know park it with teh lights on by a building and then back >>> up about 20 feet and see where the one out of alignment is moving to and >>> then just adjust it... but on this car i cant get a socket in to get to >>> what looks like the 10 mm bolt to do anything to it... i can get an opne >>> end wrench on it (10 MM), but cant turn it as there is no room with the >>> sheet metal blocking the movement of the wrench.... and i can only find >>> one bolt, i guess its for the up and down movement???? its ont he upper >>> left(sitting in the car) on the left headlight in back of it.... >>> any help or web sites??? thanks for a reply.... > thanks, but if you are talking about the 1/4 in drive handle, i got that > and the flexible shaft also, even tried the off set ratchet double ended > box wrench.. went to harbor freight and bought one, went out to car and > tried it.. no room to even get the tool to lay on the bolt...muchless > turn it... looks like the flat ratchet might work, but cannot find a 10 > mm one at any sears store locally... thanks anyway, just looking for > someone that did align their headlights on a 2001 civic... Seems like the easy thing would be to call a Honda dealer (or several) and ask them what tool they use & if there is a "trick" to it. Most of them will just tell you. |
Re: 2001 Civic
E. Meyer wrote:
> > On 1/26/04 10:07 PM, in article 4015E46D.3B24@noname.com, "jim" > <jim@noname.com> wrote: > > > Jonathan Upright wrote: > >> > >> Go get one of those tools that looks like a screw driver but has the 10mm > >> hex end instead of an acutal screwdriver tip. Those are usually slimmer > >> than a socket. Worst case scenario, try needle-nose pliers, but be careful > >> if you go that route. > >> > >> Good luck! > >> > >> Jonathan > >> > >> "jim" <jim@noname.com> wrote in message news:40156992.578B@noname.com... > >>> got a 2001 civic, have to adjust the headlights, one is pointed down > >>> slightly.. i know park it with teh lights on by a building and then back > >>> up about 20 feet and see where the one out of alignment is moving to and > >>> then just adjust it... but on this car i cant get a socket in to get to > >>> what looks like the 10 mm bolt to do anything to it... i can get an opne > >>> end wrench on it (10 MM), but cant turn it as there is no room with the > >>> sheet metal blocking the movement of the wrench.... and i can only find > >>> one bolt, i guess its for the up and down movement???? its ont he upper > >>> left(sitting in the car) on the left headlight in back of it.... > >>> any help or web sites??? thanks for a reply.... > > thanks, but if you are talking about the 1/4 in drive handle, i got that > > and the flexible shaft also, even tried the off set ratchet double ended > > box wrench.. went to harbor freight and bought one, went out to car and > > tried it.. no room to even get the tool to lay on the bolt...muchless > > turn it... looks like the flat ratchet might work, but cannot find a 10 > > mm one at any sears store locally... thanks anyway, just looking for > > someone that did align their headlights on a 2001 civic... > > Seems like the easy thing would be to call a Honda dealer (or several) and > ask them what tool they use & if there is a "trick" to it. Most of them > will just tell you. thanks for the reply e meyer.... |
Re: 2001 Civic
E. Meyer wrote:
> > On 1/26/04 10:07 PM, in article 4015E46D.3B24@noname.com, "jim" > <jim@noname.com> wrote: > > > Jonathan Upright wrote: > >> > >> Go get one of those tools that looks like a screw driver but has the 10mm > >> hex end instead of an acutal screwdriver tip. Those are usually slimmer > >> than a socket. Worst case scenario, try needle-nose pliers, but be careful > >> if you go that route. > >> > >> Good luck! > >> > >> Jonathan > >> > >> "jim" <jim@noname.com> wrote in message news:40156992.578B@noname.com... > >>> got a 2001 civic, have to adjust the headlights, one is pointed down > >>> slightly.. i know park it with teh lights on by a building and then back > >>> up about 20 feet and see where the one out of alignment is moving to and > >>> then just adjust it... but on this car i cant get a socket in to get to > >>> what looks like the 10 mm bolt to do anything to it... i can get an opne > >>> end wrench on it (10 MM), but cant turn it as there is no room with the > >>> sheet metal blocking the movement of the wrench.... and i can only find > >>> one bolt, i guess its for the up and down movement???? its ont he upper > >>> left(sitting in the car) on the left headlight in back of it.... > >>> any help or web sites??? thanks for a reply.... > > thanks, but if you are talking about the 1/4 in drive handle, i got that > > and the flexible shaft also, even tried the off set ratchet double ended > > box wrench.. went to harbor freight and bought one, went out to car and > > tried it.. no room to even get the tool to lay on the bolt...muchless > > turn it... looks like the flat ratchet might work, but cannot find a 10 > > mm one at any sears store locally... thanks anyway, just looking for > > someone that did align their headlights on a 2001 civic... > > Seems like the easy thing would be to call a Honda dealer (or several) and > ask them what tool they use & if there is a "trick" to it. Most of them > will just tell you. thanks for the reply e meyer.... |
| All times are GMT -4. The time now is 11:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands