Airkings

I have a 2001 CRV that has worked just dandy until a recent problem with my
left headlamp. It sometimes works, sometimes doesn't. The filaments appear
intact. The connection seems firm. However, when it goes out, sometimes I
can jiggle the connection and then shut the hood (with a little slam) and it
goes back on! Must be a connection, no? How do I get to the bottom of this?
Thanks!

--
x-no-archive: yes

Dave

Doug McCrary

Airkings <airkingsNO*SPAM@ix.netcom.com> wrote in message
news:4Dtud.7471$yr1.6763@newsread3.news.pas.earthl ink.net...
> I have a 2001 CRV that has worked just dandy until a recent problem with
my
> left headlamp. It sometimes works, sometimes doesn't. The filaments appear
> intact. The connection seems firm. However, when it goes out, sometimes I
> can jiggle the connection and then shut the hood (with a little slam) and
it
> goes back on! Must be a connection, no? How do I get to the bottom of
this?
> Thanks!
>
> --
> x-no-archive: yes
>
> Dave
>
>
I'd swap the headlamp. If that fixes/moves it - there you go. If you buy a
new one rather than swap the existing ones, you have a spare that you'll
likely need eventually.

Alternately, you could put new connectors or recrimp the old ones first, but
my bet is on the lamp itself, despite that it apears intact.

Doug McCrary

Airkings <airkingsNO*SPAM@ix.netcom.com> wrote in message
news:4Dtud.7471$yr1.6763@newsread3.news.pas.earthl ink.net...
> I have a 2001 CRV that has worked just dandy until a recent problem with
my
> left headlamp. It sometimes works, sometimes doesn't. The filaments appear
> intact. The connection seems firm. However, when it goes out, sometimes I
> can jiggle the connection and then shut the hood (with a little slam) and
it
> goes back on! Must be a connection, no? How do I get to the bottom of
this?
> Thanks!
>
> --
> x-no-archive: yes
>
> Dave
>
>
I'd swap the headlamp. If that fixes/moves it - there you go. If you buy a
new one rather than swap the existing ones, you have a spare that you'll
likely need eventually.

Alternately, you could put new connectors or recrimp the old ones first, but
my bet is on the lamp itself, despite that it apears intact.

Michael Pardee

"Airkings" <airkingsNO*SPAM@ix.netcom.com> wrote in message
news:4Dtud.7471$yr1.6763@newsread3.news.pas.earthl ink.net...
>I have a 2001 CRV that has worked just dandy until a recent problem with my
>left headlamp. It sometimes works, sometimes doesn't. The filaments appear
>intact. The connection seems firm. However, when it goes out, sometimes I
>can jiggle the connection and then shut the hood (with a little slam) and
>it goes back on! Must be a connection, no? How do I get to the bottom of
>this? Thanks!
>
> --
> x-no-archive: yes
>
> Dave
>
Start with Doug McCrary's excellent advice. If the problem doesn't follow
the bulb, look at the ground connection for the bulb. Often the wire will go
to a screw, and the metal under the ring terminal there may need to be
scraped bare. (I like ScotchBrite for that, although a knife blade does a
passable job.)

Mike

Michael Pardee

"Airkings" <airkingsNO*SPAM@ix.netcom.com> wrote in message
news:4Dtud.7471$yr1.6763@newsread3.news.pas.earthl ink.net...
>I have a 2001 CRV that has worked just dandy until a recent problem with my
>left headlamp. It sometimes works, sometimes doesn't. The filaments appear
>intact. The connection seems firm. However, when it goes out, sometimes I
>can jiggle the connection and then shut the hood (with a little slam) and
>it goes back on! Must be a connection, no? How do I get to the bottom of
>this? Thanks!
>
> --
> x-no-archive: yes
>
> Dave
>
Start with Doug McCrary's excellent advice. If the problem doesn't follow
the bulb, look at the ground connection for the bulb. Often the wire will go
to a screw, and the metal under the ring terminal there may need to be
scraped bare. (I like ScotchBrite for that, although a knife blade does a
passable job.)

Mike