GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   Honda Mailing List (https://www.gtcarz.com/honda-mailing-list-327/)
-   -   2003 Accord LX wheel cover problem (https://www.gtcarz.com/honda-mailing-list-327/2003-accord-lx-wheel-cover-problem-276025/)

dbtexas@earthlink.net.invalid 09-14-2003 11:19 AM

2003 Accord LX wheel cover problem
 
Car came with std wheel covers. I notice that one wheel cover is
trying to come off at one spot. I know it can't due to the wheel nuts
but it's annoying to see it as it is. I can see one, what appears to
be a plastic pinch / clip at the edge, inside the wheel cover and I've
tried to rubber mallet the wheel cover back with no success. Short of
taking the wheel off, is there anything I can do to hammer it back on
so it stays on / snug ?? I guess I'll be forced to go to the
dealership to get it back on properly if I can't solve it today.


** remove .invalid from my email address to reply by email **






Jacques Dorval 09-16-2003 11:22 AM

Re: 2003 Accord LX wheel cover problem
 
Did you tried to loosen the whell nuts et rethight them, I had the same
problem on a civic after hitting a curb sideway and loosing the nuts took
care of the problem

<dbtexas@earthlink.net.invalid> a écrit dans le message de
news:l719mv4e86jlta4n08iop17t6qnittunme@4ax.com...
> Car came with std wheel covers. I notice that one wheel cover is
> trying to come off at one spot. I know it can't due to the wheel nuts
> but it's annoying to see it as it is. I can see one, what appears to
> be a plastic pinch / clip at the edge, inside the wheel cover and I've
> tried to rubber mallet the wheel cover back with no success. Short of
> taking the wheel off, is there anything I can do to hammer it back on
> so it stays on / snug ?? I guess I'll be forced to go to the
> dealership to get it back on properly if I can't solve it today.
>
>
> ** remove .invalid from my email address to reply by email **
>
>
>
>
>




Jacques Dorval 09-16-2003 11:22 AM

Re: 2003 Accord LX wheel cover problem
 
Did you tried to loosen the whell nuts et rethight them, I had the same
problem on a civic after hitting a curb sideway and loosing the nuts took
care of the problem

<dbtexas@earthlink.net.invalid> a écrit dans le message de
news:l719mv4e86jlta4n08iop17t6qnittunme@4ax.com...
> Car came with std wheel covers. I notice that one wheel cover is
> trying to come off at one spot. I know it can't due to the wheel nuts
> but it's annoying to see it as it is. I can see one, what appears to
> be a plastic pinch / clip at the edge, inside the wheel cover and I've
> tried to rubber mallet the wheel cover back with no success. Short of
> taking the wheel off, is there anything I can do to hammer it back on
> so it stays on / snug ?? I guess I'll be forced to go to the
> dealership to get it back on properly if I can't solve it today.
>
>
> ** remove .invalid from my email address to reply by email **
>
>
>
>
>




Jacques Dorval 09-16-2003 11:22 AM

Re: 2003 Accord LX wheel cover problem
 
Did you tried to loosen the whell nuts et rethight them, I had the same
problem on a civic after hitting a curb sideway and loosing the nuts took
care of the problem

<dbtexas@earthlink.net.invalid> a écrit dans le message de
news:l719mv4e86jlta4n08iop17t6qnittunme@4ax.com...
> Car came with std wheel covers. I notice that one wheel cover is
> trying to come off at one spot. I know it can't due to the wheel nuts
> but it's annoying to see it as it is. I can see one, what appears to
> be a plastic pinch / clip at the edge, inside the wheel cover and I've
> tried to rubber mallet the wheel cover back with no success. Short of
> taking the wheel off, is there anything I can do to hammer it back on
> so it stays on / snug ?? I guess I'll be forced to go to the
> dealership to get it back on properly if I can't solve it today.
>
>
> ** remove .invalid from my email address to reply by email **
>
>
>
>
>





All times are GMT -4. The time now is 06:59 PM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.06269 seconds with 5 queries