db

I decided to check the air filter (pain in the neck) and got the
housing apart and cleaned it. However putting it back together I
dropped and lost the screw/bolt nearest the strut (you'd think this
would be the easiest almost but not for me). If I want to replace
it, does anyone know the size/length of the bolt and can it be had at
a auto parts store or is it a dealer item only?

db

On Tue, 02 Oct 2007 13:12:59 -0500, db wrote:

>I decided to check the air filter (pain in the neck) and got the
>housing apart and cleaned it. However putting it back together I
>dropped and lost the screw/bolt nearest the strut (you'd think this
>would be the easiest almost but not for me). If I want to replace
>it, does anyone know the size/length of the bolt and can it be had at
>a auto parts store or is it a dealer item only?


I found the size on line but went ahead and bought one at the dealer
for about $3.00 . I asked if there was any special tool for these
bolts and he said no (told me one mechanic also lost one as I did this
week). I managed to get it to go in after 5 minutes and oiling the
screw. I have no idea where the old screw is now but it appears to
either be in a safe place or fell out from the bottom by now. I think
next time I will let Honda do this. FWIW, I used a small can of
compressed air to clean the filter of loose dirt. It appeared to be
in good shape except for some blackness (oil perhaps??) to it but no
tears or deformation.

db

On Tue, 02 Oct 2007 13:12:59 -0500, db wrote:

>I decided to check the air filter (pain in the neck) and got the
>housing apart and cleaned it. However putting it back together I
>dropped and lost the screw/bolt nearest the strut (you'd think this
>would be the easiest almost but not for me). If I want to replace
>it, does anyone know the size/length of the bolt and can it be had at
>a auto parts store or is it a dealer item only?


I found the size on line but went ahead and bought one at the dealer
for about $3.00 . I asked if there was any special tool for these
bolts and he said no (told me one mechanic also lost one as I did this
week). I managed to get it to go in after 5 minutes and oiling the
screw. I have no idea where the old screw is now but it appears to
either be in a safe place or fell out from the bottom by now. I think
next time I will let Honda do this. FWIW, I used a small can of
compressed air to clean the filter of loose dirt. It appeared to be
in good shape except for some blackness (oil perhaps??) to it but no
tears or deformation.