Re: 92 Accord Engine High Speed Hesitation Problem
 

Steve Bigelow wrote:
> "N.E.Ohio Bob" <rgstroud@neo.rr.com> wrote in message
> news:Mw3me.3400$XA6.2621@tornado.ohiordc.rr.com...
>
>>Be sure the throttle body is clean. There are also some passage ways in
>>the air intake area just before the injectors that can be cleaned out.
>>They are plugged at the factory after casting the part, but the plugs can
>>be drilled out, and the holes can be taped and small bolts installed after
>>cleaning.
>
>
> The EGR plugs are available over the counter at the dealer, for cheap. A
> slide hammer works quite well for removal.
>
>
>
can you describe this process for me? i'm looking at doing this for my
civic and want to know from someone that's done it before.

Re: 92 Accord Engine High Speed Hesitation Problem
 

Steve Bigelow wrote:
> "N.E.Ohio Bob" <rgstroud@neo.rr.com> wrote in message
> news:Mw3me.3400$XA6.2621@tornado.ohiordc.rr.com...
>
>>Be sure the throttle body is clean. There are also some passage ways in
>>the air intake area just before the injectors that can be cleaned out.
>>They are plugged at the factory after casting the part, but the plugs can
>>be drilled out, and the holes can be taped and small bolts installed after
>>cleaning.
>
>
> The EGR plugs are available over the counter at the dealer, for cheap. A
> slide hammer works quite well for removal.
>
>
>
can you describe this process for me? i'm looking at doing this for my
civic and want to know from someone that's done it before.

Re: 92 Accord Engine High Speed Hesitation Problem
 

"jim beam" <nospam@example.net> wrote in message
news:0audnUtKU_XqSgTfRVn-uQ@speakeasy.net...
> Steve Bigelow wrote:
>> "N.E.Ohio Bob" <rgstroud@neo.rr.com> wrote in message
>> news:Mw3me.3400$XA6.2621@tornado.ohiordc.rr.com...
>>
>>>Be sure the throttle body is clean. There are also some passage ways in
>>>the air intake area just before the injectors that can be cleaned out.
>>>They are plugged at the factory after casting the part, but the plugs can
>>>be drilled out, and the holes can be taped and small bolts installed
>>>after cleaning.
>>
>>
>> The EGR plugs are available over the counter at the dealer, for cheap. A
>> slide hammer works quite well for removal.
>>
>>
>>
> can you describe this process for me? i'm looking at doing this for my
> civic and want to know from someone that's done it before.

Drill a wee hole almost through the plug, screw in the hammer, bang them
out.
Clean out everything you can see with carb cleaner and small picks/drill
bits, and tap in the new plugs. I used drill bits as a drift to set the new
plugs.

Re: 92 Accord Engine High Speed Hesitation Problem
 

"jim beam" <nospam@example.net> wrote in message
news:0audnUtKU_XqSgTfRVn-uQ@speakeasy.net...
> Steve Bigelow wrote:
>> "N.E.Ohio Bob" <rgstroud@neo.rr.com> wrote in message
>> news:Mw3me.3400$XA6.2621@tornado.ohiordc.rr.com...
>>
>>>Be sure the throttle body is clean. There are also some passage ways in
>>>the air intake area just before the injectors that can be cleaned out.
>>>They are plugged at the factory after casting the part, but the plugs can
>>>be drilled out, and the holes can be taped and small bolts installed
>>>after cleaning.
>>
>>
>> The EGR plugs are available over the counter at the dealer, for cheap. A
>> slide hammer works quite well for removal.
>>
>>
>>
> can you describe this process for me? i'm looking at doing this for my
> civic and want to know from someone that's done it before.

Drill a wee hole almost through the plug, screw in the hammer, bang them
out.
Clean out everything you can see with carb cleaner and small picks/drill
bits, and tap in the new plugs. I used drill bits as a drift to set the new
plugs.

Re: 92 Accord Engine High Speed Hesitation Problem
 

This is for CB7 Accords, but yours should be similar.
http://home.comcast.net/~em-engineering/T2T013.pdf


"jim beam" <nospam@example.net> wrote in message
news:0audnUtKU_XqSgTfRVn-uQ@speakeasy.net...
> Steve Bigelow wrote:
>> "N.E.Ohio Bob" <rgstroud@neo.rr.com> wrote in message
>> news:Mw3me.3400$XA6.2621@tornado.ohiordc.rr.com...
>>
>>>Be sure the throttle body is clean. There are also some passage ways in
>>>the air intake area just before the injectors that can be cleaned out.
>>>They are plugged at the factory after casting the part, but the plugs can
>>>be drilled out, and the holes can be taped and small bolts installed
>>>after cleaning.
>>
>>
>> The EGR plugs are available over the counter at the dealer, for cheap. A
>> slide hammer works quite well for removal.
>>
>>
>>
> can you describe this process for me? i'm looking at doing this for my
> civic and want to know from someone that's done it before.
>

Re: 92 Accord Engine High Speed Hesitation Problem
 

This is for CB7 Accords, but yours should be similar.
http://home.comcast.net/~em-engineering/T2T013.pdf


"jim beam" <nospam@example.net> wrote in message
news:0audnUtKU_XqSgTfRVn-uQ@speakeasy.net...
> Steve Bigelow wrote:
>> "N.E.Ohio Bob" <rgstroud@neo.rr.com> wrote in message
>> news:Mw3me.3400$XA6.2621@tornado.ohiordc.rr.com...
>>
>>>Be sure the throttle body is clean. There are also some passage ways in
>>>the air intake area just before the injectors that can be cleaned out.
>>>They are plugged at the factory after casting the part, but the plugs can
>>>be drilled out, and the holes can be taped and small bolts installed
>>>after cleaning.
>>
>>
>> The EGR plugs are available over the counter at the dealer, for cheap. A
>> slide hammer works quite well for removal.
>>
>>
>>
> can you describe this process for me? i'm looking at doing this for my
> civic and want to know from someone that's done it before.
>

Re: 92 Accord Engine High Speed Hesitation Problem
 

Steve Bigelow wrote:
> "jim beam" <nospam@example.net> wrote in message
> news:0audnUtKU_XqSgTfRVn-uQ@speakeasy.net...
>
>>Steve Bigelow wrote:
>>
>>>"N.E.Ohio Bob" <rgstroud@neo.rr.com> wrote in message
>>>news:Mw3me.3400$XA6.2621@tornado.ohiordc.rr.com ...
>>>
>>>
>>>>Be sure the throttle body is clean. There are also some passage ways in
>>>>the air intake area just before the injectors that can be cleaned out.
>>>>They are plugged at the factory after casting the part, but the plugs can
>>>>be drilled out, and the holes can be taped and small bolts installed
>>>>after cleaning.
>>>
>>>
>>>The EGR plugs are available over the counter at the dealer, for cheap. A
>>>slide hammer works quite well for removal.
>>>
>>>
>>>
>>
>>can you describe this process for me? i'm looking at doing this for my
>>civic and want to know from someone that's done it before.
>>
> This is for CB7 Accords, but yours should be similar.
> http://home.comcast.net/~em-engineering/T2T013.pdf
>
wow! totally awesome pdf. don't think that'll work for the civic -
different porting/valve assembly from what i can see, but i'll check
again. thanks steve!

Re: 92 Accord Engine High Speed Hesitation Problem
 

Steve Bigelow wrote:
> "jim beam" <nospam@example.net> wrote in message
> news:0audnUtKU_XqSgTfRVn-uQ@speakeasy.net...
>
>>Steve Bigelow wrote:
>>
>>>"N.E.Ohio Bob" <rgstroud@neo.rr.com> wrote in message
>>>news:Mw3me.3400$XA6.2621@tornado.ohiordc.rr.com ...
>>>
>>>
>>>>Be sure the throttle body is clean. There are also some passage ways in
>>>>the air intake area just before the injectors that can be cleaned out.
>>>>They are plugged at the factory after casting the part, but the plugs can
>>>>be drilled out, and the holes can be taped and small bolts installed
>>>>after cleaning.
>>>
>>>
>>>The EGR plugs are available over the counter at the dealer, for cheap. A
>>>slide hammer works quite well for removal.
>>>
>>>
>>>
>>
>>can you describe this process for me? i'm looking at doing this for my
>>civic and want to know from someone that's done it before.
>>
> This is for CB7 Accords, but yours should be similar.
> http://home.comcast.net/~em-engineering/T2T013.pdf
>
wow! totally awesome pdf. don't think that'll work for the civic -
different porting/valve assembly from what i can see, but i'll check
again. thanks steve!

Re: 92 Accord Engine High Speed Hesitation Problem
 

In article <face-67D14C.14551428052005@news-rdr-01.ohiordc.rr.com>, Face
<face@yahoo.com> wrote:

> In article <dj1me.2436$uu.2081@newssvr33.news.prodigy.com>,
> "Paul Reis" <Bumpin4@sbcglobal.net> wrote:
>
> > Could it be one of your wires grounding out?
> >
> >
> > "Face" <face@yahoo.com> wrote in message
> > news:face-D671DA.08070828052005@news-rdr-02.ohiordc.rr.com...
> > > Looking for some advice on a small problem I'm having with a 92 Accord,
> > > automatic transmission with 156K miles. Everything on the engine is
> > > original except for the distributor. Excluding plugs and filters of
> > > course.
> > >
> > > When driving on the freeway anywhere between 65 and 75 miles an hour and
> > > at a constant speed, when depressing the accelerator slightly the engine
> > > will start to buck or accelerate roughly. Sorry, it's hard to explain.
> > > If I accelerate faster it doesn't seem to do it. This doesn't happen
> > > all the time either. It doesn't happen at slower speeds or when
> > > accelerating from a stop no matter how hard. Otherwise the car runs
> > > fine. Not burning any oil and my gas mileage is pretty much the same as
> > > the day I got the car.
> > >
> > > Any thoughts on what the problem might be?
> > >
> > > Thanks
>
> I would think it's possible. I take the car in for all of its scheduled
> service and when I remember I as ask about the plug wires and they keep
> telling me that they don't need replaced unless there is a problem. You
> would think there would be a replacement interval on them.

Regardless of what they told you--they should be replaced at least after
100,000 miles. Some mechanics replace them after 50,000 miles even if they
appear to be in perfect shape. I have about 62,000 miles on my Accord and
plan to replace them the next time that a tune-up is done.

--
NEWSGROUP SUBSCRIBERS MOTTO
We respect those subscribers that ask for advice or provide advice.
We do NOT respect the subscribers that enjoy criticizing people.

Re: 92 Accord Engine High Speed Hesitation Problem
 

In article <face-67D14C.14551428052005@news-rdr-01.ohiordc.rr.com>, Face
<face@yahoo.com> wrote:

> In article <dj1me.2436$uu.2081@newssvr33.news.prodigy.com>,
> "Paul Reis" <Bumpin4@sbcglobal.net> wrote:
>
> > Could it be one of your wires grounding out?
> >
> >
> > "Face" <face@yahoo.com> wrote in message
> > news:face-D671DA.08070828052005@news-rdr-02.ohiordc.rr.com...
> > > Looking for some advice on a small problem I'm having with a 92 Accord,
> > > automatic transmission with 156K miles. Everything on the engine is
> > > original except for the distributor. Excluding plugs and filters of
> > > course.
> > >
> > > When driving on the freeway anywhere between 65 and 75 miles an hour and
> > > at a constant speed, when depressing the accelerator slightly the engine
> > > will start to buck or accelerate roughly. Sorry, it's hard to explain.
> > > If I accelerate faster it doesn't seem to do it. This doesn't happen
> > > all the time either. It doesn't happen at slower speeds or when
> > > accelerating from a stop no matter how hard. Otherwise the car runs
> > > fine. Not burning any oil and my gas mileage is pretty much the same as
> > > the day I got the car.
> > >
> > > Any thoughts on what the problem might be?
> > >
> > > Thanks
>
> I would think it's possible. I take the car in for all of its scheduled
> service and when I remember I as ask about the plug wires and they keep
> telling me that they don't need replaced unless there is a problem. You
> would think there would be a replacement interval on them.

Regardless of what they told you--they should be replaced at least after
100,000 miles. Some mechanics replace them after 50,000 miles even if they
appear to be in perfect shape. I have about 62,000 miles on my Accord and
plan to replace them the next time that a tune-up is done.

--
NEWSGROUP SUBSCRIBERS MOTTO
We respect those subscribers that ask for advice or provide advice.
We do NOT respect the subscribers that enjoy criticizing people.

Re: 92 Accord Engine High Speed Hesitation Problem
 

I had the exact same symptoms on an 86 CRX. I always thought it was in the
injection system, since it happened at part throttle, but I could not get
anyone to take it seriously. Never did solve it- finally traded it in on a
94 Acura Integra.

--
Bob Burns
Mill Hall PA
(email is spamtrap)


"Face" <face@yahoo.com> wrote in message
news:face-D671DA.08070828052005@news-rdr-02.ohiordc.rr.com...
> Looking for some advice on a small problem I'm having with a 92 Accord,
> automatic transmission with 156K miles. Everything on the engine is
> original except for the distributor. Excluding plugs and filters of
> course.
>
> When driving on the freeway anywhere between 65 and 75 miles an hour and
> at a constant speed, when depressing the accelerator slightly the engine
> will start to buck or accelerate roughly. Sorry, it's hard to explain.
> If I accelerate faster it doesn't seem to do it. This doesn't happen
> all the time either. It doesn't happen at slower speeds or when
> accelerating from a stop no matter how hard. Otherwise the car runs
> fine. Not burning any oil and my gas mileage is pretty much the same as
> the day I got the car.
>
> Any thoughts on what the problem might be?
>
> Thanks

Re: 92 Accord Engine High Speed Hesitation Problem
 

I had the exact same symptoms on an 86 CRX. I always thought it was in the
injection system, since it happened at part throttle, but I could not get
anyone to take it seriously. Never did solve it- finally traded it in on a
94 Acura Integra.

--
Bob Burns
Mill Hall PA
(email is spamtrap)


"Face" <face@yahoo.com> wrote in message
news:face-D671DA.08070828052005@news-rdr-02.ohiordc.rr.com...
> Looking for some advice on a small problem I'm having with a 92 Accord,
> automatic transmission with 156K miles. Everything on the engine is
> original except for the distributor. Excluding plugs and filters of
> course.
>
> When driving on the freeway anywhere between 65 and 75 miles an hour and
> at a constant speed, when depressing the accelerator slightly the engine
> will start to buck or accelerate roughly. Sorry, it's hard to explain.
> If I accelerate faster it doesn't seem to do it. This doesn't happen
> all the time either. It doesn't happen at slower speeds or when
> accelerating from a stop no matter how hard. Otherwise the car runs
> fine. Not burning any oil and my gas mileage is pretty much the same as
> the day I got the car.
>
> Any thoughts on what the problem might be?
>
> Thanks

Re: 92 Accord Engine High Speed Hesitation Problem
 

In article <iKLme.10542$uR4.7648@newsread2.news.atl.earthlink .net>,
"Bob Burns" <treborburns@earthlink.net> wrote:

> I had the exact same symptoms on an 86 CRX. I always thought it was in the
> injection system, since it happened at part throttle, but I could not get
> anyone to take it seriously. Never did solve it- finally traded it in on a
> 94 Acura Integra.
>
> --
> Bob Burns
> Mill Hall PA
> (email is spamtrap)
>
>
> "Face" <face@yahoo.com> wrote in message
> news:face-D671DA.08070828052005@news-rdr-02.ohiordc.rr.com...
> > Looking for some advice on a small problem I'm having with a 92 Accord,
> > automatic transmission with 156K miles. Everything on the engine is
> > original except for the distributor. Excluding plugs and filters of
> > course.
> >
> > When driving on the freeway anywhere between 65 and 75 miles an hour and
> > at a constant speed, when depressing the accelerator slightly the engine
> > will start to buck or accelerate roughly. Sorry, it's hard to explain.
> > If I accelerate faster it doesn't seem to do it. This doesn't happen
> > all the time either. It doesn't happen at slower speeds or when
> > accelerating from a stop no matter how hard. Otherwise the car runs
> > fine. Not burning any oil and my gas mileage is pretty much the same as
> > the day I got the car.
> >
> > Any thoughts on what the problem might be?
> >
> > Thanks

Bob,

This is why I brought it up here. I fear that if I take it to the dealer
and try to explain to them what it's doing they'll say ok, keep the car
all day and then say it didn't do it or that they can't find anything
wrong with it.

Re: 92 Accord Engine High Speed Hesitation Problem
 

In article <iKLme.10542$uR4.7648@newsread2.news.atl.earthlink .net>,
"Bob Burns" <treborburns@earthlink.net> wrote:

> I had the exact same symptoms on an 86 CRX. I always thought it was in the
> injection system, since it happened at part throttle, but I could not get
> anyone to take it seriously. Never did solve it- finally traded it in on a
> 94 Acura Integra.
>
> --
> Bob Burns
> Mill Hall PA
> (email is spamtrap)
>
>
> "Face" <face@yahoo.com> wrote in message
> news:face-D671DA.08070828052005@news-rdr-02.ohiordc.rr.com...
> > Looking for some advice on a small problem I'm having with a 92 Accord,
> > automatic transmission with 156K miles. Everything on the engine is
> > original except for the distributor. Excluding plugs and filters of
> > course.
> >
> > When driving on the freeway anywhere between 65 and 75 miles an hour and
> > at a constant speed, when depressing the accelerator slightly the engine
> > will start to buck or accelerate roughly. Sorry, it's hard to explain.
> > If I accelerate faster it doesn't seem to do it. This doesn't happen
> > all the time either. It doesn't happen at slower speeds or when
> > accelerating from a stop no matter how hard. Otherwise the car runs
> > fine. Not burning any oil and my gas mileage is pretty much the same as
> > the day I got the car.
> >
> > Any thoughts on what the problem might be?
> >
> > Thanks

Bob,

This is why I brought it up here. I fear that if I take it to the dealer
and try to explain to them what it's doing they'll say ok, keep the car
all day and then say it didn't do it or that they can't find anything
wrong with it.

Re: 92 Accord Engine High Speed Hesitation Problem
 

In article
<437e869d68efa3ea8836265d39a83d73@localhost.talkab outautos.com>,
"duckbill" <ltcauth13@nospam.cs.com> wrote:

> Did you try to download any codes out of the ECU? What kind of plugs are
> you running? I would check them even if they are fairly new.

Not yet. I don't have a code scanner if in fact you need one
or know how to get the codes. In fact I don't even know if the dealer
checks for codes while the car is in for scheduled maintenance.

The car has stock plugs in it. NGK. They were replaced at 150K.