93 Civic ignition coil
 

I have been having trouble with my 93 Civic starting after a rain.
Considered all the most likely candidates and bought/replaced plug
wires, distributor cap and rotor; still no go! Then, I noticed that the
2" protrusion on my coil was completely GONE! Probably broken off from
becoming brittle/ heat crystallized. Also, there was no d-cap o-ring
when I started; go figure. Anyway, now my new problem is that I
disconnected the 2 wires from the coil leading to the ignitor and don't
remember which goes where (duh)! To add insult to injury, one of the
wire's terminal ends broke and a contact screw is stuck in the old
coil. Got the new screw/nut, new coil, new terminal end. Now, (help) -
can someone please tell me which wire goes where when reconnecting to
the ignitor. The 2 terminal ends are the ones on the ignitor closest to
the coil. Thanks