94 accord inner tie rods
 

How do I replace the inner tie rods on a 94 accord?

Re: 94 accord inner tie rods
 

"Doug" <dwreeves@sbcglobal.net> wrote in message
news:bDzYk.5849$hc1.1980@flpi150.ffdc.sbc.com...
> How do I replace the inner tie rods on a 94 accord?
>

You might consider having this done by a shop. It isn't time consuming if
you have the right tools (particularly a ball joint separator - NOT a pickle
fork), but is a devil without them. An alignment is mandatory afterward.
Still interested?

Mike

Re: 94 accord inner tie rods
 

Doug <dwreeves@sbcglobal.net> wrote in news:bDzYk.5849$hc1.1980
@flpi150.ffdc.sbc.com:

> How do I replace the inner tie rods on a 94 accord?



What makes you think you need to replace these? They hardly ever wear out.

--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Re: 94 accord inner tie rods
 

Tegger wrote:
> Doug <dwreeves@sbcglobal.net> wrote in news:bDzYk.5849$hc1.1980
> @flpi150.ffdc.sbc.com:
>
>> How do I replace the inner tie rods on a 94 accord?
>
>
>
> What makes you think you need to replace these? They hardly ever wear out.
>
Steering rack boot is cracked and grease is coming from the tie rod joint.

Re: 94 accord inner tie rods
 

Tegger wrote:
> Doug <dwreeves@sbcglobal.net> wrote in news:bDzYk.5849$hc1.1980
> @flpi150.ffdc.sbc.com:
>
>> How do I replace the inner tie rods on a 94 accord?
>
>
>
> What makes you think you need to replace these? They hardly ever wear out.
>
Steering rack boot is cracked and grease is coming from the tie rod joint.

Re: 94 accord inner tie rods
 

Doug wrote:
> Tegger wrote:
>> Doug <dwreeves@sbcglobal.net> wrote in news:bDzYk.5849$hc1.1980
>> @flpi150.ffdc.sbc.com:
>>
>>> How do I replace the inner tie rods on a 94 accord?
>>
>>
>>
>> What makes you think you need to replace these? They hardly ever wear
>> out.
>>
> Steering rack boot is cracked and grease is coming from the tie rod joint.


If the boot hasn't been cracked for too long you may get away with just
replacing the boot. If the grease is contaminated with crud you'll want
to at least wash it out and repack it. So long as it has not become worn
you're probably fine not replacing it.

Re: 94 accord inner tie rods
 

James Sweet wrote:

> Doug wrote:
>> Steering rack boot is cracked and grease is coming from the tie rod
>> joint.

> If the boot hasn't been cracked for too long you may get away with just
> replacing the boot. If the grease is contaminated with crud you'll want
> to at least wash it out and repack it. So long as it has not become worn
> you're probably fine not replacing it.

"What he said."
It can take a looong time for dirt to work its way into the joint. Buy
a new boot for now and clean/repack the ball joint when you replace it.
If you find the joint to be dry or full of grit, THEN you might have a
problem...

Re: 94 accord inner tie rods
 

Doug <dwreeves@sbcglobal.net> wrote in
news:493353BE.8090806@sbcglobal.net:

> Tegger wrote:
>> Doug <dwreeves@sbcglobal.net> wrote in news:bDzYk.5849$hc1.1980
>> @flpi150.ffdc.sbc.com:
>>
>>> How do I replace the inner tie rods on a 94 accord?
>>
>>
>>
>> What makes you think you need to replace these? They hardly ever wear
>> out.
>>
> Steering rack boot is cracked and grease is coming from the tie rod
> joint.


Pop the outer tie rod balljoint from the steering knuckle. Check for in/out
movement on the tie rod. If none, replace the boot and be done with it.

Make sure you reinstall the outer tie rod PRECISELY as it came off, to
preserve your steering alignment.

Chances are excellent the inner joint is just fine in spite of the split
boot.


--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Re: 94 accord inner tie rods
 

"Tegger" <invalid@invalid.inv> wrote in message
news:Xns9B67478622945tegger@208.90.168.18...
> Doug <dwreeves@sbcglobal.net> wrote in
> news:493353BE.8090806@sbcglobal.net:
>
>> Tegger wrote:
>>> Doug <dwreeves@sbcglobal.net> wrote in news:bDzYk.5849$hc1.1980
>>> @flpi150.ffdc.sbc.com:
>>>
>>>> How do I replace the inner tie rods on a 94 accord?
>>>
>>>
>>>
>>> What makes you think you need to replace these? They hardly ever wear
>>> out.
>>>
>> Steering rack boot is cracked and grease is coming from the tie rod
>> joint.
>
>
> Pop the outer tie rod balljoint from the steering knuckle. Check for
> in/out
> movement on the tie rod. If none, replace the boot and be done with it.
>
> Make sure you reinstall the outer tie rod PRECISELY as it came off, to
> preserve your steering alignment.
>
> Chances are excellent the inner joint is just fine in spite of the split
> boot.
>
>
> --
> Tegger
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
>

Doug, this is the part that requires the proper tool. Use only a ball joint
separator, not a "pickle fork" or you will have to replace the tie rod. If
the boot on the ball joint is already torn (you mention grease coming out,
but it could be coming from around the boot instead of through a split) the
boot at least needs to be replaced. Long ago somebody posted a source for
ball joint boots but I don't have it. I found
http://www.energysuspension.com/pages/tierboots.html in Google.

As Teg says, install it exactly as it comes off. Don't let it rotate 360
degrees or you will need alignment.

If the tie rod actually needs replacement, the process this far is the same.
In addition, the connection at the rack is separated by double wrenching
with a 22 mm wrench and a 17 mm wrench (IIRC). Be careful not to torque on
the rack much when doing that; just squeeze the two wrenches together when
removing and when installing. Match the new tie rod to the length of the old
one, but an alignment is still mandatory.