95 Odyssey Air Intake locations
I want to spray Lysol into the air intake vents due to a stong musty smell.
However, the grille that covers those vents goes across the entire width of the car, hiding the actual vent locations. Hoping to avoid taking the grille off, can anyone describe where the actual vents are? Thanks, Lar |
Re: 95 Odyssey Air Intake locations
have you tried dropping the fan motor down, its easy and might help. Not
really sure on the intake, however, if you drop the motor that might help gane access to some of these areas... L "Larry B" <hatespam@hatespam.gov> wrote in message news:hLIdd.3076$KJ6.2884@newsread1.news.pas.earthl ink.net... > I want to spray Lysol into the air intake vents due to a stong musty smell. > However, the grille that covers those vents goes across the entire width of > the car, hiding the actual vent locations. > > Hoping to avoid taking the grille off, can anyone describe where the actual > vents are? > > Thanks, Lar > > > |
Re: 95 Odyssey Air Intake locations
have you tried dropping the fan motor down, its easy and might help. Not
really sure on the intake, however, if you drop the motor that might help gane access to some of these areas... L "Larry B" <hatespam@hatespam.gov> wrote in message news:hLIdd.3076$KJ6.2884@newsread1.news.pas.earthl ink.net... > I want to spray Lysol into the air intake vents due to a stong musty smell. > However, the grille that covers those vents goes across the entire width of > the car, hiding the actual vent locations. > > Hoping to avoid taking the grille off, can anyone describe where the actual > vents are? > > Thanks, Lar > > > |
Re: 95 Odyssey Air Intake locations
Larry B wrote:
> I want to spray Lysol into the air intake vents due to a stong musty smell. > However, the grille that covers those vents goes across the entire width of > the car, hiding the actual vent locations. > > Hoping to avoid taking the grille off, can anyone describe where the actual > vents are? > > Thanks, Lar =============== Like Larry said . . .Three screws and a connector, fan falls out on floor. While it's out, blow the motor out with HIGH pressure air to remove all the carbon powder. 'Curly' |
Re: 95 Odyssey Air Intake locations
Larry B wrote:
> I want to spray Lysol into the air intake vents due to a stong musty smell. > However, the grille that covers those vents goes across the entire width of > the car, hiding the actual vent locations. > > Hoping to avoid taking the grille off, can anyone describe where the actual > vents are? > > Thanks, Lar =============== Like Larry said . . .Three screws and a connector, fan falls out on floor. While it's out, blow the motor out with HIGH pressure air to remove all the carbon powder. 'Curly' |
Re: 95 Odyssey Air Intake locations
"motsco_ _" <"motsco_ _"@interbaun.com> wrote in message news:4177D84F.9080306@interbaun.com... > Larry B wrote: > > I want to spray Lysol into the air intake vents due to a stong musty smell. > > However, the grille that covers those vents goes across the entire width of > > the car, hiding the actual vent locations. > > > > Hoping to avoid taking the grille off, can anyone describe where the actual > > vents are? > > > > Thanks, Lar > > > =============== > > Like Larry said . . .Three screws and a connector, fan falls out on > floor. While it's out, blow the motor out with HIGH pressure air to > remove all the carbon powder. > > 'Curly' > That's a great suggestion. Three screws and a yank I can do! What will I have access to through the motor mounting hole? Will the evaporator be accessible so that I can spray it directly?? Is there a product available that is better than Lysol for this use?? Thanks again, Lar |
Re: 95 Odyssey Air Intake locations
"motsco_ _" <"motsco_ _"@interbaun.com> wrote in message news:4177D84F.9080306@interbaun.com... > Larry B wrote: > > I want to spray Lysol into the air intake vents due to a stong musty smell. > > However, the grille that covers those vents goes across the entire width of > > the car, hiding the actual vent locations. > > > > Hoping to avoid taking the grille off, can anyone describe where the actual > > vents are? > > > > Thanks, Lar > > > =============== > > Like Larry said . . .Three screws and a connector, fan falls out on > floor. While it's out, blow the motor out with HIGH pressure air to > remove all the carbon powder. > > 'Curly' > That's a great suggestion. Three screws and a yank I can do! What will I have access to through the motor mounting hole? Will the evaporator be accessible so that I can spray it directly?? Is there a product available that is better than Lysol for this use?? Thanks again, Lar |
All times are GMT -4. The time now is 12:36 AM. |
© 2024 MH Sub I, LLC dba Internet Brands