GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   Honda Mailing List (https://www.gtcarz.com/honda-mailing-list-327/)
-   -   96 Accord oil pressure (https://www.gtcarz.com/honda-mailing-list-327/96-accord-oil-pressure-297662/)

sledman2 03-20-2007 03:32 AM

96 Accord oil pressure
 
I just chnged the camshaft seal in a 96 Accord with a 2.2 Now the oil
light stays on till you rev the engine a few times.Once the light goes
out it stays out until the car is shut off for ten minutes,then the
problem comes back.Any thoughts?
Sledman2


--
Posted at author's request, using http://www.AutoBoardz.com interface
Articles individually verified to usenet standards. Visit URL to contact author/report abuse
Thread archive: http://www.AutoBoardz.com/96-oil-pre...ict209491.html


Michael Pardee 03-21-2007 12:50 AM

Re: 96 Accord oil pressure
 
"sledman2" <none@000.com> wrote in message
news:991709_19a6a75e19e76584ca453c74b409ba00@autob oardz.com...
>I just chnged the camshaft seal in a 96 Accord with a 2.2 Now the oil
> light stays on till you rev the engine a few times.Once the light goes
> out it stays out until the car is shut off for ten minutes,then the
> problem comes back.Any thoughts?
> Sledman2
>
>

A suggestion for which I expect to be roasted: replace the oil pressure
sender on general principles.

My reasoning is that either the pressure is good or it is bad. If the
pressure is good and the light is coming on, the sender is bad. If the
pressure is bad... well, an 11 year old sender is worth replacing anyway.
Replacing the sender costs about as much as checking the oil pressure and
tells you most of what an oil pressure measurement will.

I'm thinking you are the victim of odd circumstance... I can't think of any
reason for the oil pressure to act up after you changed the camshaft seal as
long as oil isn't pouring out.

Mike





All times are GMT -4. The time now is 06:36 PM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.05859 seconds with 5 queries