GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   Honda Mailing List (https://www.gtcarz.com/honda-mailing-list-327/)
-   -   98 Honda Civic Roof Wiring Colors (https://www.gtcarz.com/honda-mailing-list-327/98-honda-civic-roof-wiring-colors-293652/)

Guildford30 08-26-2006 12:41 AM

98 Honda Civic Roof Wiring Colors
 
I have a 98 Honda Civic with moonroof and trying to install a powerered
auto dimming / compass mirror. I took out the interior trim of the left
front pillar and see a bunch of wires. Most wires are about 16 gauge, I
have noted the ones that are thicker. They are colored

Yellow
Yellow with Red Stripe (14 gauge)
White with Red Stripe
Green with Red Stripe (14 gauge)
Aqua / teal with Red Stripe
Green with Yellow Stripe
Blue
Black (12 gauge)


I need ground, ignition on(or accessory, but prefer ignition), and
constant on wires. I'm thinking black is ground, and constant on I can
just tap from the map lights. Any ideas which one would be the ignition
on wires?


Greg 08-26-2006 10:31 AM

Re: 98 Honda Civic Roof Wiring Colors
 
Looking at the service manual, the white/red is the constant on, and
the black is the ground. Your requirement for ignition on is a bit more
complicated because the rest of the wires operate the moonroof and the
ceiling light. There does not appear to be a single wire for ignition
on (e.g., yellow is ignition on when the moonroof is opening).

I think your best bet is to run your own ignition on wire from under
the dash. Maybe someone else will have a better idea, but I don't think
it would be too hard to run a new wire up and around the pillar.

>
> I need ground, ignition on(or accessory, but prefer ignition), and
> constant on wires. I'm thinking black is ground, and constant on I can
> just tap from the map lights. Any ideas which one would be the ignition
> on wires?



Greg 08-26-2006 10:31 AM

Re: 98 Honda Civic Roof Wiring Colors
 
Looking at the service manual, the white/red is the constant on, and
the black is the ground. Your requirement for ignition on is a bit more
complicated because the rest of the wires operate the moonroof and the
ceiling light. There does not appear to be a single wire for ignition
on (e.g., yellow is ignition on when the moonroof is opening).

I think your best bet is to run your own ignition on wire from under
the dash. Maybe someone else will have a better idea, but I don't think
it would be too hard to run a new wire up and around the pillar.

>
> I need ground, ignition on(or accessory, but prefer ignition), and
> constant on wires. I'm thinking black is ground, and constant on I can
> just tap from the map lights. Any ideas which one would be the ignition
> on wires?



Greg 08-26-2006 10:31 AM

Re: 98 Honda Civic Roof Wiring Colors
 
Looking at the service manual, the white/red is the constant on, and
the black is the ground. Your requirement for ignition on is a bit more
complicated because the rest of the wires operate the moonroof and the
ceiling light. There does not appear to be a single wire for ignition
on (e.g., yellow is ignition on when the moonroof is opening).

I think your best bet is to run your own ignition on wire from under
the dash. Maybe someone else will have a better idea, but I don't think
it would be too hard to run a new wire up and around the pillar.

>
> I need ground, ignition on(or accessory, but prefer ignition), and
> constant on wires. I'm thinking black is ground, and constant on I can
> just tap from the map lights. Any ideas which one would be the ignition
> on wires?



Greg 08-26-2006 10:31 AM

Re: 98 Honda Civic Roof Wiring Colors
 
Looking at the service manual, the white/red is the constant on, and
the black is the ground. Your requirement for ignition on is a bit more
complicated because the rest of the wires operate the moonroof and the
ceiling light. There does not appear to be a single wire for ignition
on (e.g., yellow is ignition on when the moonroof is opening).

I think your best bet is to run your own ignition on wire from under
the dash. Maybe someone else will have a better idea, but I don't think
it would be too hard to run a new wire up and around the pillar.

>
> I need ground, ignition on(or accessory, but prefer ignition), and
> constant on wires. I'm thinking black is ground, and constant on I can
> just tap from the map lights. Any ideas which one would be the ignition
> on wires?




All times are GMT -4. The time now is 10:09 AM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.03660 seconds with 5 queries