tdyck60@hotmail.com

I need to replace the seat heaters on a 98 Accord V6. The drivers
seat heater pad has failed and I want to replace them. Has anyone
done this? How difficult is it to take these out and what is the
procedure? Any help would be appreciated.

Tony

N.E.Ohio Bob

tdyck60@hotmail.com wrote:
> I need to replace the seat heaters on a 98 Accord V6. The drivers
> seat heater pad has failed and I want to replace them. Has anyone
> done this? How difficult is it to take these out and what is the
> procedure? Any help would be appreciated.
>
> Tony
>
I'm just guessin, but I think you need a good trim shop. bob

E Meyer

On 4/14/07 9:45 AM, in article g2q123hpfdg231aj4p6i9aq6rpedc7q2e1@4ax.com,
"tdyck60@hotmail.com" <tdyck60@hotmail.com> wrote:

> I need to replace the seat heaters on a 98 Accord V6. The drivers
> seat heater pad has failed and I want to replace them. Has anyone
> done this? How difficult is it to take these out and what is the
> procedure? Any help would be appreciated.
>
> Tony
>


I recommend you price the job at a couple of local trim shops before you try
to do it yourself. You may find that the labor is not particularly
expensive after you factor out the cost of the heaters themselves.

Being really cheap I replaced them myself on the '00 TL. Disassembly is not
difficult if you have an FSM (the Helm book) with the procedures. It is
non-obvious what has to come off & in what order without the book. Since the
TL has side airbags in the seat backs, I would not have tried it without the
FSM.

The one specialized piece of equipment you need to reinstall the upholstery
is a hog ring pliers. I could not find a local source to buy or rent one.
About the time I was ready to give up and pay somebody to put it back
together, I found an accommodating trim shop who lent me the pliers and gave
me a hand full of the rings.

tdyck60@hotmail.com

On Sat, 14 Apr 2007 21:42:40 GMT, E Meyer <epmeyer50@msn.com> wrote:

>On 4/14/07 9:45 AM, in article g2q123hpfdg231aj4p6i9aq6rpedc7q2e1@4ax.com,
>"tdyck60@hotmail.com" <tdyck60@hotmail.com> wrote:
>
>> I need to replace the seat heaters on a 98 Accord V6. The drivers
>> seat heater pad has failed and I want to replace them. Has anyone
>> done this? How difficult is it to take these out and what is the
>> procedure? Any help would be appreciated.
>>
>> Tony
>>
>
>
>I recommend you price the job at a couple of local trim shops before you try
>to do it yourself. You may find that the labor is not particularly
>expensive after you factor out the cost of the heaters themselves.
>
>Being really cheap I replaced them myself on the '00 TL. Disassembly is not
>difficult if you have an FSM (the Helm book) with the procedures. It is
>non-obvious what has to come off & in what order without the book. Since the
>TL has side airbags in the seat backs, I would not have tried it without the
>FSM.
>
>The one specialized piece of equipment you need to reinstall the upholstery
>is a hog ring pliers. I could not find a local source to buy or rent one.
>About the time I was ready to give up and pay somebody to put it back
>together, I found an accommodating trim shop who lent me the pliers and gave
>me a hand full of the rings.
>
>

Thanks for the info. I wanted to find out if I was over my head
without a manual or special tools. Nothing worse than getting
something 1/2 apart and realizing you are screwed.

Tony

Say What?

tdyck60@hotmail.com wrote:
> On Sat, 14 Apr 2007 21:42:40 GMT, E Meyer <epmeyer50@msn.com> wrote:
>
>> On 4/14/07 9:45 AM, in article g2q123hpfdg231aj4p6i9aq6rpedc7q2e1@4ax.com,
>> "tdyck60@hotmail.com" <tdyck60@hotmail.com> wrote:
>>
>>> I need to replace the seat heaters on a 98 Accord V6. The drivers
>>> seat heater pad has failed and I want to replace them. Has anyone
>>> done this? How difficult is it to take these out and what is the
>>> procedure? Any help would be appreciated.
> Thanks for the info. I wanted to find out if I was over my head
> without a manual or special tools. Nothing worse than getting
> something 1/2 apart and realizing you are screwed.


Ah, but there is something worse... MUCH worse and that's getting it
totally apart and inoperable before realizing you're screwed!<g>

Wise move to check before you start tugging.