GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   Honda Mailing List (https://www.gtcarz.com/honda-mailing-list-327/)
-   -   Acura VSS on a Honda (https://www.gtcarz.com/honda-mailing-list-327/acura-vss-honda-289601/)

newsrichie@yahoo.com 10-21-2005 05:49 PM

Acura VSS on a Honda
 
Hey guys I was wondering if you could help me with a tranny question. I
am swaping a 6 spd tranny from a CL-s into my Accord V6. My main
problem is that the accord uses variable reluctor speed sensors that
have 2 wires and the CL uses a 3 wire sensor that outputs a 5Vpp
signal. If I were to connect the 5Vpp signal to the variable reluctor
input would it do any damage? I'm thinking the variable reluctor signal
must be high impedance and shouldn't hurt itself but it would suck if
I burned out the ECU. Thanks for looking.


hondaman 10-23-2005 03:58 PM

Re: Acura VSS on a Honda
 
u might want to see if u could change your ecu to the acura one also to
control the different transmission.
<newsrichie@yahoo.com> wrote in message
news:1129931366.824071.249490@g43g2000cwa.googlegr oups.com...
> Hey guys I was wondering if you could help me with a tranny question. I
> am swaping a 6 spd tranny from a CL-s into my Accord V6. My main
> problem is that the accord uses variable reluctor speed sensors that
> have 2 wires and the CL uses a 3 wire sensor that outputs a 5Vpp
> signal. If I were to connect the 5Vpp signal to the variable reluctor
> input would it do any damage? I'm thinking the variable reluctor signal
> must be high impedance and shouldn't hurt itself but it would suck if
> I burned out the ECU. Thanks for looking.
>
>




hondaman 10-23-2005 03:58 PM

Re: Acura VSS on a Honda
 
u might want to see if u could change your ecu to the acura one also to
control the different transmission.
<newsrichie@yahoo.com> wrote in message
news:1129931366.824071.249490@g43g2000cwa.googlegr oups.com...
> Hey guys I was wondering if you could help me with a tranny question. I
> am swaping a 6 spd tranny from a CL-s into my Accord V6. My main
> problem is that the accord uses variable reluctor speed sensors that
> have 2 wires and the CL uses a 3 wire sensor that outputs a 5Vpp
> signal. If I were to connect the 5Vpp signal to the variable reluctor
> input would it do any damage? I'm thinking the variable reluctor signal
> must be high impedance and shouldn't hurt itself but it would suck if
> I burned out the ECU. Thanks for looking.
>
>





All times are GMT -4. The time now is 06:06 PM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.03526 seconds with 3 queries