aftermarket rotors/brakes
I've tried the Midas touch and was extremely disappointed.
I'm looking for a more heavy duty rotor and pad system for a 99 accord exv6. Any suggestions? |
Re: aftermarket rotors/brakes
RanMan wrote:
> I've tried the Midas touch and was extremely disappointed. > > I'm looking for a more heavy duty rotor and pad system for a 99 accord exv6. what problem are you experiencing that makes you want "more heavy duty"? > > Any suggestions? > > |
Re: aftermarket rotors/brakes
RanMan wrote:
> I've tried the Midas touch and was extremely disappointed. > > I'm looking for a more heavy duty rotor and pad system for a 99 accord exv6. what problem are you experiencing that makes you want "more heavy duty"? > > Any suggestions? > > |
Re: aftermarket rotors/brakes
the rear rotors are too thin (not vented like the front) and warp easily.
"jim beam" <nospam@example.net> wrote in message news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews... > RanMan wrote: >> I've tried the Midas touch and was extremely disappointed. >> >> I'm looking for a more heavy duty rotor and pad system for a 99 accord >> exv6. > > what problem are you experiencing that makes you want "more heavy duty"? > >> >> Any suggestions? > |
Re: aftermarket rotors/brakes
the rear rotors are too thin (not vented like the front) and warp easily.
"jim beam" <nospam@example.net> wrote in message news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews... > RanMan wrote: >> I've tried the Midas touch and was extremely disappointed. >> >> I'm looking for a more heavy duty rotor and pad system for a 99 accord >> exv6. > > what problem are you experiencing that makes you want "more heavy duty"? > >> >> Any suggestions? > |
Re: aftermarket rotors/brakes
They warp easily only when your wheels are improperly torqued or when you
mix different manufacturer pads and rotors (cheap stuff) that will cause excessive heat due to unmatched coefficient of friction. "RanMan" <rw@twcny.rr.com> wrote in message news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com... > the rear rotors are too thin (not vented like the front) and warp easily. > > "jim beam" <nospam@example.net> wrote in message > news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews... >> RanMan wrote: >>> I've tried the Midas touch and was extremely disappointed. >>> >>> I'm looking for a more heavy duty rotor and pad system for a 99 accord >>> exv6. >> >> what problem are you experiencing that makes you want "more heavy duty"? >> >>> >>> Any suggestions? >> > > |
Re: aftermarket rotors/brakes
They warp easily only when your wheels are improperly torqued or when you
mix different manufacturer pads and rotors (cheap stuff) that will cause excessive heat due to unmatched coefficient of friction. "RanMan" <rw@twcny.rr.com> wrote in message news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com... > the rear rotors are too thin (not vented like the front) and warp easily. > > "jim beam" <nospam@example.net> wrote in message > news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews... >> RanMan wrote: >>> I've tried the Midas touch and was extremely disappointed. >>> >>> I'm looking for a more heavy duty rotor and pad system for a 99 accord >>> exv6. >> >> what problem are you experiencing that makes you want "more heavy duty"? >> >>> >>> Any suggestions? >> > > |
Re: aftermarket rotors/brakes
"RanMan" <rw@twcny.rr.com> wrote in
news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com: > > "jim beam" <nospam@example.net> wrote in message > news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews... >> RanMan wrote: >>> I've tried the Midas touch and was extremely disappointed. >>> >>> I'm looking for a more heavy duty rotor and pad system for a 99 accord >>> exv6. >> >> what problem are you experiencing that makes you want "more heavy duty"? >> > > the rear rotors are too thin (not vented like the front) and warp easily. The rear brakes don't DO nothin'. Except rust. And seize. I suspect your warpage problem is just poor maintenance. -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Re: aftermarket rotors/brakes
"RanMan" <rw@twcny.rr.com> wrote in
news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com: > > "jim beam" <nospam@example.net> wrote in message > news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews... >> RanMan wrote: >>> I've tried the Midas touch and was extremely disappointed. >>> >>> I'm looking for a more heavy duty rotor and pad system for a 99 accord >>> exv6. >> >> what problem are you experiencing that makes you want "more heavy duty"? >> > > the rear rotors are too thin (not vented like the front) and warp easily. The rear brakes don't DO nothin'. Except rust. And seize. I suspect your warpage problem is just poor maintenance. -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Re: aftermarket rotors/brakes
"TeGGer®" <tegger@istop.c0m> wrote in
news:Xns95F8C625E5DFEteggeratistop@207.14.113.17: > "RanMan" <rw@twcny.rr.com> wrote in > news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com: > >> >> "jim beam" <nospam@example.net> wrote in message >> news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews... >>> RanMan wrote: >>>> I've tried the Midas touch and was extremely disappointed. >>>> >>>> I'm looking for a more heavy duty rotor and pad system for a 99 >>>> accord exv6. >>> >>> what problem are you experiencing that makes you want "more heavy >>> duty"? >>> >> >> the rear rotors are too thin (not vented like the front) and warp >> easily. > > > > The rear brakes don't DO nothin'. Except rust. And seize. > > I suspect your warpage problem is just poor maintenance. > > You would be surprised at how much the rear brakes DO do. I had a 63 Triumph Herald lose it's brakes due to failure of a rear brake cylinder seal,and blocked off the rear half of the system(before cross- connected systems) to get home. It makes a big difference. -- Jim Yanik jyanik at kua.net |
Re: aftermarket rotors/brakes
"TeGGer®" <tegger@istop.c0m> wrote in
news:Xns95F8C625E5DFEteggeratistop@207.14.113.17: > "RanMan" <rw@twcny.rr.com> wrote in > news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com: > >> >> "jim beam" <nospam@example.net> wrote in message >> news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews... >>> RanMan wrote: >>>> I've tried the Midas touch and was extremely disappointed. >>>> >>>> I'm looking for a more heavy duty rotor and pad system for a 99 >>>> accord exv6. >>> >>> what problem are you experiencing that makes you want "more heavy >>> duty"? >>> >> >> the rear rotors are too thin (not vented like the front) and warp >> easily. > > > > The rear brakes don't DO nothin'. Except rust. And seize. > > I suspect your warpage problem is just poor maintenance. > > You would be surprised at how much the rear brakes DO do. I had a 63 Triumph Herald lose it's brakes due to failure of a rear brake cylinder seal,and blocked off the rear half of the system(before cross- connected systems) to get home. It makes a big difference. -- Jim Yanik jyanik at kua.net |
Re: aftermarket rotors/brakes
What do you mean by "poor maintenance"?
I tried to get Midas to replace the pads in Nov. '04, they said they didn't need replacing, unfortunately I took their word for it and didn't insist. Then in January '05 I took it back and they now say the left rear rotor is warped. By the way, it's the wife's car, low mileage and I keep it cleaned and well maintained. "TeGGer®" <tegger@istop.c0m> wrote in message news:Xns95F8C625E5DFEteggeratistop@207.14.113.17.. . > "RanMan" <rw@twcny.rr.com> wrote in > news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com: > >> >> "jim beam" <nospam@example.net> wrote in message >> news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews... >>> RanMan wrote: >>>> I've tried the Midas touch and was extremely disappointed. >>>> >>>> I'm looking for a more heavy duty rotor and pad system for a 99 accord >>>> exv6. >>> >>> what problem are you experiencing that makes you want "more heavy duty"? >>> >> >> the rear rotors are too thin (not vented like the front) and warp easily. > > > > The rear brakes don't DO nothin'. Except rust. And seize. > > I suspect your warpage problem is just poor maintenance. > > > -- > TeGGeR® > > The Unofficial Honda/Acura FAQ > www.tegger.com/hondafaq/ |
Re: aftermarket rotors/brakes
What do you mean by "poor maintenance"?
I tried to get Midas to replace the pads in Nov. '04, they said they didn't need replacing, unfortunately I took their word for it and didn't insist. Then in January '05 I took it back and they now say the left rear rotor is warped. By the way, it's the wife's car, low mileage and I keep it cleaned and well maintained. "TeGGer®" <tegger@istop.c0m> wrote in message news:Xns95F8C625E5DFEteggeratistop@207.14.113.17.. . > "RanMan" <rw@twcny.rr.com> wrote in > news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com: > >> >> "jim beam" <nospam@example.net> wrote in message >> news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews... >>> RanMan wrote: >>>> I've tried the Midas touch and was extremely disappointed. >>>> >>>> I'm looking for a more heavy duty rotor and pad system for a 99 accord >>>> exv6. >>> >>> what problem are you experiencing that makes you want "more heavy duty"? >>> >> >> the rear rotors are too thin (not vented like the front) and warp easily. > > > > The rear brakes don't DO nothin'. Except rust. And seize. > > I suspect your warpage problem is just poor maintenance. > > > -- > TeGGeR® > > The Unofficial Honda/Acura FAQ > www.tegger.com/hondafaq/ |
Re: aftermarket rotors/brakes
Don't put too much effort in trying to explain your mainenance habits on the
car. That guy doesn't know what he is talking about. Brakes warp for a number of reasons and I have had a few brand new cars warp rotors after a few thousand miles. It has nothing to do with maintenance the majority of the time. The rear brakes obviously help the car stop. The only maintenance you can do is adjust the rear drums, if it has drums, and do periodic brake inspections to verify that one caliper isn't sticking and the brakes are wearing evenly. Other than that you are at the mercy of the crappy, base line brake systems put on most cars today. Warpage can be created by unevenly torquing/overtorquing the wheels when put back on or riding your brakes but that is really about it. I can tell you from personal experience to stay away from cross drilled rotors. They crack. The slotted rotors may be your best bet with a good pair of ceramic pads. Also stay away from braided metal brake hoses. Absolute crap. "RanMan" <rw@twcny.rr.com> wrote in message news:unzOd.29334$8H2.14735@twister.nyroc.rr.com... > What do you mean by "poor maintenance"? > > I tried to get Midas to replace the pads in Nov. '04, they said they > didn't need replacing, unfortunately I took their word for it and didn't > insist. > > Then in January '05 I took it back and they now say the left rear rotor is > warped. > > By the way, it's the wife's car, low mileage and I keep it cleaned and > well maintained. > > "TeGGer®" <tegger@istop.c0m> wrote in message > news:Xns95F8C625E5DFEteggeratistop@207.14.113.17.. . >> "RanMan" <rw@twcny.rr.com> wrote in >> news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com: >> >>> >>> "jim beam" <nospam@example.net> wrote in message >>> news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews... >>>> RanMan wrote: >>>>> I've tried the Midas touch and was extremely disappointed. >>>>> >>>>> I'm looking for a more heavy duty rotor and pad system for a 99 accord >>>>> exv6. >>>> >>>> what problem are you experiencing that makes you want "more heavy >>>> duty"? >>>> >>> >>> the rear rotors are too thin (not vented like the front) and warp >>> easily. >> >> >> >> The rear brakes don't DO nothin'. Except rust. And seize. >> >> I suspect your warpage problem is just poor maintenance. >> >> >> -- >> TeGGeR® >> >> The Unofficial Honda/Acura FAQ >> www.tegger.com/hondafaq/ > > |
Re: aftermarket rotors/brakes
Don't put too much effort in trying to explain your mainenance habits on the
car. That guy doesn't know what he is talking about. Brakes warp for a number of reasons and I have had a few brand new cars warp rotors after a few thousand miles. It has nothing to do with maintenance the majority of the time. The rear brakes obviously help the car stop. The only maintenance you can do is adjust the rear drums, if it has drums, and do periodic brake inspections to verify that one caliper isn't sticking and the brakes are wearing evenly. Other than that you are at the mercy of the crappy, base line brake systems put on most cars today. Warpage can be created by unevenly torquing/overtorquing the wheels when put back on or riding your brakes but that is really about it. I can tell you from personal experience to stay away from cross drilled rotors. They crack. The slotted rotors may be your best bet with a good pair of ceramic pads. Also stay away from braided metal brake hoses. Absolute crap. "RanMan" <rw@twcny.rr.com> wrote in message news:unzOd.29334$8H2.14735@twister.nyroc.rr.com... > What do you mean by "poor maintenance"? > > I tried to get Midas to replace the pads in Nov. '04, they said they > didn't need replacing, unfortunately I took their word for it and didn't > insist. > > Then in January '05 I took it back and they now say the left rear rotor is > warped. > > By the way, it's the wife's car, low mileage and I keep it cleaned and > well maintained. > > "TeGGer®" <tegger@istop.c0m> wrote in message > news:Xns95F8C625E5DFEteggeratistop@207.14.113.17.. . >> "RanMan" <rw@twcny.rr.com> wrote in >> news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com: >> >>> >>> "jim beam" <nospam@example.net> wrote in message >>> news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews... >>>> RanMan wrote: >>>>> I've tried the Midas touch and was extremely disappointed. >>>>> >>>>> I'm looking for a more heavy duty rotor and pad system for a 99 accord >>>>> exv6. >>>> >>>> what problem are you experiencing that makes you want "more heavy >>>> duty"? >>>> >>> >>> the rear rotors are too thin (not vented like the front) and warp >>> easily. >> >> >> >> The rear brakes don't DO nothin'. Except rust. And seize. >> >> I suspect your warpage problem is just poor maintenance. >> >> >> -- >> TeGGeR® >> >> The Unofficial Honda/Acura FAQ >> www.tegger.com/hondafaq/ > > |
All times are GMT -4. The time now is 03:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands