Brake booster fault?
#1
Guest
Posts: n/a
Brake booster fault?
I have a 1994 Honda Accord US Wagon.
When the motor stops the brakes have no boost at all.
I also have a Nissan Primera & the booster retains its vacuum when switched
off, sufficient for about 3 applications of the brakes, which is normal.
Could the non return valve to the booster be faulty? It has done 163,000
km.
When the motor stops the brakes have no boost at all.
I also have a Nissan Primera & the booster retains its vacuum when switched
off, sufficient for about 3 applications of the brakes, which is normal.
Could the non return valve to the booster be faulty? It has done 163,000
km.
#2
Guest
Posts: n/a
Re: Brake booster fault?
"Peter Humphreys" <peterhum@xtra.co.nz> wrote in message
news:fqc4l1h3f93ivbe70h61fbbrus4o7f820g@4ax.com...
>I have a 1994 Honda Accord US Wagon.
> When the motor stops the brakes have no boost at all.
> I also have a Nissan Primera & the booster retains its vacuum when
> switched
> off, sufficient for about 3 applications of the brakes, which is normal.
> Could the non return valve to the booster be faulty? It has done 163,000
> km.
It could be either the valve or the booster; they're about equally suspect.
The hoses to the valve should not affect the ability to retain vacuum. The
valve is easy enough to check by pulling it out and giving it The Kiss of
Test. You should be able to blow through it from the booster end to the hose
end but not the other way. Now wipe that silly black ring off your lips. :-)
If the valve tests okay you are probably in the market for a new booster.
(The "probably" is from doubts whether pushrod adjustment can cause your
symptoms - you can check the adjustment by following the link below.)
Replacement is a medium DIY project with tight spaces, and wrecking yards
are the most affordable source (I paid $75 US to a they-pull-it yard for the
last one I did.) If you have to replace it, and you go the DIY route, check
http://tegger.com/hondafaq/mastercyl...djustment.html for pushrod
adjustment info.
Mike
news:fqc4l1h3f93ivbe70h61fbbrus4o7f820g@4ax.com...
>I have a 1994 Honda Accord US Wagon.
> When the motor stops the brakes have no boost at all.
> I also have a Nissan Primera & the booster retains its vacuum when
> switched
> off, sufficient for about 3 applications of the brakes, which is normal.
> Could the non return valve to the booster be faulty? It has done 163,000
> km.
It could be either the valve or the booster; they're about equally suspect.
The hoses to the valve should not affect the ability to retain vacuum. The
valve is easy enough to check by pulling it out and giving it The Kiss of
Test. You should be able to blow through it from the booster end to the hose
end but not the other way. Now wipe that silly black ring off your lips. :-)
If the valve tests okay you are probably in the market for a new booster.
(The "probably" is from doubts whether pushrod adjustment can cause your
symptoms - you can check the adjustment by following the link below.)
Replacement is a medium DIY project with tight spaces, and wrecking yards
are the most affordable source (I paid $75 US to a they-pull-it yard for the
last one I did.) If you have to replace it, and you go the DIY route, check
http://tegger.com/hondafaq/mastercyl...djustment.html for pushrod
adjustment info.
Mike
#3
Guest
Posts: n/a
Re: Brake booster fault?
Peter Humphreys wrote:
> I have a 1994 Honda Accord US Wagon.
> When the motor stops the brakes have no boost at all.
> I also have a Nissan Primera & the booster retains its vacuum when switched
> off, sufficient for about 3 applications of the brakes, which is normal.
> Could the non return valve to the booster be faulty? It has done 163,000
> km.
it should retain vacuum. as mike says, test & replace accordingly.
> I have a 1994 Honda Accord US Wagon.
> When the motor stops the brakes have no boost at all.
> I also have a Nissan Primera & the booster retains its vacuum when switched
> off, sufficient for about 3 applications of the brakes, which is normal.
> Could the non return valve to the booster be faulty? It has done 163,000
> km.
it should retain vacuum. as mike says, test & replace accordingly.
Thread
Thread Starter
Forum
Replies
Last Post
mk.kemkd@yahoo.com
Hyundai Mailing List
0
03-03-2009 01:08 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)